Posts by V7108SAV

Thanks for your answer.

The only thing that I want when I control DI with volume pedal is when I want to (I do not know if I could describe it well as English is not my native language) make a fade in to the guitars. I can do it well with the wet signal so its fade in is when and how I want it. So I suppose the same will be with the dry signal and so it will not require further edit in DAW after reamping.

Also I'd like to ask how to connect my Kemper analog to the UAP Apollo Firewire. I am thinking that if I use xlr to xlr the signal will flow through two preamp stages one from the Kemper and one from my Apollo. Am I right or this is wrong?

Is it ok to connect it with unbalanced cables from 1/4 ts outputs to Apollo's line in or I have to go through Hi-Z input? According to Apollo's manual the line inputs are TRS but it could handle TS cables too.

Or maybe I have to buy an XLR to TRS cable and connect the XLR outputs of Kemper to line inputs of Apollo?

As far as I understand the main Kemper outputs (XLR and 1/4 TS) are both line level but I am not sure for that.

^Hi....!!!

I am confused. The unbalanced ts cable outputs of Kemper are line level? So I connect with the line inputs of my UAD Apollo. And if in DI output I use git analog output option then I connect to the di to a Hi-Z input?

Sorry for the questions.... I got confused a lot!

Hi,

thanks for your answer. Yes I have activated it in the rig page. But even in the rig that I work I could not control di output volume with my pedal.

Hi,

I'd like to make a question as I have not find the answer yet. I use my kemper with S/PDIF cables to my UAD Apollo and almost everytime I record the pure guitar signal for reamping purposes. As S/PDIF output I use Git/ Stack option so in the left channel I send the direct signal and in the right channel the stack signal. I always use an EP1-KP for volume control, but I cannot assign it to control direct output as well. According to the manual for git/stack output option

"The left signal is the pure instrument, with Noise Gate and Volume Pedal (if Volume Pedal is set to “Input”). The right channel will carry the stack signal and does not include any post amp effects".

At rig settings I set the location of Volume pedal to Input but I cannot control the pure instrument's volume at all, only the right channel where the signal going through the stack section.

Could you please tell me if I am doing something wrong or am I ignoring any other setting?

Thanks

I'd like to thank everyone for your answers

I also believe the same. But I feel that I use another's work for my own profit. I do not own any amp for now and I cannot make my own rigs to exchange. I definitely would have no problem if somebody could use any rig I could upload in the future if I would buy an amp, profiled it and upload it in the rig exchange for free.

Hi,
I am new here bought my Kemper just a few months ago and I started this week working in my new studio. I download the Rig Manager and I was really impressed from the variety of rigs I saw. I tested some of them ( i was searching for specific amps) and some stuff is really great. I kindly have to make some questions as new here
Let's say that I use in a commercial personal work either as an artist or as a producer (reamping for other bands etc) a free profile made from any user I found in Rig Exchange. I suppose I am able to use it for my commercial purposes aren't I?. I am a big tweaker btw (I also play keyboards and that's the reason) but I have already found 2-3 profiles that do not need tweaking according to my taste. Can I use them freely?
Also in the rig manager there is a folder named rig packs. Those rigs are free to use in commercial works?
I really thank you in advance and I am really happy to be a part of Kemper community!!!!!!