Maybe you have some sound examples for us ?
I suppose you tried several guitars ?
I once had a bad volume pot making all sound thin and fizzy.
Maybe you have some sound examples for us ?
I suppose you tried several guitars ?
I once had a bad volume pot making all sound thin and fizzy.
Welcome home, Sir !
metoo for CE414. The Taylor PU is horrible.
I bought a Seymour Duncan MigMag, the sound is perfect for me.
Give it try. If you like it, you can re-wire the battery and output
without removing ar damaging the original stuff.
Needs a little thinking and work.
I wish I could assign these Buttons to rig 6 and 7.
Separate Volume for EACH effecr.
Now I´m using a Version 2 :
Behind the plate there´s a POE Injector
and in addition I protect the Kemper´s USB interface.
Material is 3mm HPL.
The blue wonderplate is actually just a "protector", but I´m thinking about hiding an POE-injector behind it plus protecting
the USB-port, too. Stay tuned.
Pimp my Toaster : RJ45 Socket Improvement / Ethercon connector
For transporting I use a bag :
Hi there,
Just let me show you my last X-Mas CNC project !
The box is made of hidden finger-jointed plywood, the longhorn inlays are made of mahagony.
All my stuff is now completely arranged and fixed.
Ready to go !
- The Toaster (of course)
- Inear transmitter
- an EQ for the inear
- Line6 G50 Receiver
- a multiple socket with 4 slots for powersupply
- a drawer for the small things
- a new bracket (I do not trust the original strap for the complete weight)
Best regards
Bernhard
kemper-amps.com/wbb/attachment/17390/
I already use morphing for changing the amp setting.
f.e. rising gain and/or change the EQ settings.
These old eyes ... and the dark sunglasses ... on dark stages ...
Are there any good solutions for illuminating ?
Are there free wires at the remote cable in order to power to some LEDs ?
For I am the greatest lazybone under the sun I don´t want an extra cable for powering an illumination.
But I do not want to damage my beloved toaster !
Best regards
Bernhard
Hmmm...
Mix is Mix and Volume is Volume.
Have a look to the Phaser f.e.
It is heard in parallel with the dry signal, has a mix and .... tadaaaa ... a volume !
I can active the phaser (post-stack) and with raised phaser´s volume I have Solo volume with a single step on the remote.
That´s what I wish for Reverbs and Delays, too.
Would be so lazy on stage.
Please, please, please !
All other effects (as far as I know them) have this.
Why is Volume missing at Delays / Reverbs ?
Benefit : Turning on Delay AND make a volume boost simultaneously without a stepdance on the remote.
Best regards
Bernhard
Remove the Micropitch, reduce Delay/Reverb to your taste
and you´ll get a really good leadsound with tons of attack and sustain
03-StVai FTLOG
You´ll need an analog system, otherwise you´ll get unusable latency.
I use an old Sennheiser using an anaolg RF connection.
Pretty good at home. For live not good enough, cause its too much compressing at higher levels.
Ooooooh, yessss !
A bottle opener.
Yes, of course it is working - but that would occupy one post amp slot.
And using morphing I usually raise gain, volume and reverb a little.
My new button works globally until it is released.
I like adding a little volume on stage for certain songs.
Thus I need 5 rigs only for a whole gig.
Thanks !
Are the curves for Stack and Output Section identically ?