Kpa had some minor aesthetic changes about two years ago. In addition to PROFILER labeling are changed also the lines around the knobs and VOLUME has become RIG VOLUME
Posts by Andrea L
-
-
New bag (I've buy my bag about one year ago) have different fittings, probably to solve breaking problems.
-
Ciao Davide,
presumo da altro tuo post che hai collegato il remote. Non è che quando il Kpa va in blocco hai collegato anche il pc con il Rig Manager?
Se così fosse, si tratta di un problema abbastanza noto. Il Kemper digerisce male Remote e Rig Manager collegati simultaneamente.
-
You can check if the Volume Pedal Location parameter in Rig Settings is set to Off and chose the location.
In tuning mode you can check if Tuner@Volume 0 option is activated.
-
Me too!
There is one feature described I do not understand fully : " On Board charging function for rechargeable batteries" - How?
The Harley Brenton foot controller is rebranded MIDI controller made by Melo Audio and you can download the user manual at https://meloaudio.com/
-
You're right.
This is made by Red Sound.
-
My guess is, that this rig is coupled with midi program change number 5 .
Yes, is the Midi program change number. You can assign this number from System Setting.
-
I don't know if they use also for recording, but in the video of Lords of Black "World gone mad" you can see a Kemper rack on top of a Marshall cab
-
The 5.5 main manual says that modules X, MOD, DLY and REB are post cabinet:
"You can add more built-in stereo effects to the signal, after it has passed through the amplifier and virtual cabinet, in the Modules X, MOD, DLY and REV"
-
Same here . I have solved by deleting Chrome memory
-
Ciao, per passare da volume a wah devi impostare l'input 1 (nel tuo caso) come switch e impostare a quale slot effetti si riferisce. Il wah deve sempre essere messo nello slot selezionato in quanto si tratta di impostazione generale.
Scusa se non riesco ad essere più preciso ma non ho sottomano il Kpa. Comunque trovi un ottimo video di Mission Engineering.
Ciao. -
To put looper in Fx loop, the correct wiring is:
guitar > Kemper input > Kemper send > looper input > looper output > Kemper return. -
-
l use a 20 year old Midibuddy MP128 and it works perfectly
-
HiTunruh2. The right route is: Kemper> pedalboard> amp> Kemper.In this way your pedalboard will be part of the profile.
-
Ciao. Non conosco la J&f ma utilizzo una Rolls Midibuddy MP128 che ho da una ventina di anni e riesco ad utilizzarla anche in performance mode.
-
No. I have put about 20 rigs in my " Favorites".
-
Il controllo di volume non ha effetto sulla timbrica del rig e permette il bilanciamento di volumi tra i vari rig. Ho notato che rig diversi hanno volumi molto differenti e non è possibile utilizzare l'indicazione in db per il bilanciamento. L'unico metodo credo sia quello di usare il buon vecchio caro orecchio .
-
I've had the same problem. I solved by doing a reset
-
- Da quanto dice il manuale, lo speaker out è la copia del monitor out, e quindi il cab non viene escluso a priori.
Non ne sono completamente sicuro in quanto anche io ho la versione non amplificata.