Posts by Dimitri LeBel

Hi guys,

I had a problem a while ago on a live gig and I know it didn’t come from the Kemper but, I’d like to know if anybody else has had the same issue. Let me explain :

It was the first date of a month long tour and we had rehearsed for 2 days prior to that (during which, I had no problem at all). We had a very short soundcheck and, all of a sudden, the Kemper sounded in my in ear monitors as if you’d listen to the reverb bus on its own in a daw, or like a cranked Marshall with reverd and delay pedals in front of it. Like, whenever I activated the delays, the feedbacks were 2 or 3 times louder than my actual playing, thus unusable.

The weird thing is that it didn’t sound like that in the FOH or in my bandmates’s ears... And it surely didn’t help that our soundguy wouldn’t help me, considering it was my own problem since he didn’t hear it on his end.

I did the whole gig with minimal reverb (which, due to the circumstances, sounded like a cavern rev.). The next day, I had the same issue but, this time, the guitar tech listened to my mix and proved me right so we swapped mixes. The 3rd day, the problem disappeared on all mixes but, we never found were it could have been from...

We had a M32 for our ears and managed our mixes with the app. I never opened a different menu than the faders and pans page.

Can anybody think of a reason why this happened? In case the problem ever shows up again...

Thanks!

Yes, that is correct. A buddy of mine just showed me how to create scenes with the MS3 and that will do the trick.

Quote from PETERFR

Welcome Dimitri

you can switch effects on and off via midi on the kemper. Have a look at the kpa midi manual.
I think the boss is able to send cc?

Well, that was easy! Thanks a lot, it's working.

Now, the thing I need to figure out, and I really hope there is a solution, is to avoid hearing cuts in the sound when I switch patches from the MS3...

Hi guys, I'm new in the Kemper world but it's not my first modeling device.

I have also purchased the Boss MS3 after seeing Rebea's "World exclusive in depth demo". I know the Kemper remote would be an easier solution for what I'm about to ask but, in the setup I thought of (where I have another pedal size amp modeler in loop 3 of the MS3 for backup purposes), the Boss seemed like a great solution.

So, I have figured out how to load profiles just like in Rebea's vid but, I want to know if there is a way to toggle Kemper effects from the MS3. Say, have the delay on or off or whatever.

Any advice on that? Tell it how it is, I can take it

Dimitri