Does this behavior appear in Browse Mode or Performance mode or in both?
Posts by Peter@Kemper
-
-
What makes you think we won't deal with this?
We are in contact with your dealer and he has told us that he can't find any issue on your Remote.
To determine the error, it would simply be clever to inspect the Profiler as well as the Remote.
After all, we want to make sure that this issue does not reoccur.
We are on the case and my colleague will answer your today's e-mail as well.
-
Hi BigP1998
I haven't found a mail regarding a replacement in our system.
I have been in contact with you and we wrote about your settings, but didn't get a reply to my last 2 mails.
Please open a new ticket.
-
Monitor Cab off function is available for the Monitor out which shares the same signal to the speaker out.
I would use the Direct out or the Main Outs for recording with Cab sim and playing late at night.
-
the error message indicates the corrupted Rig MB Guy Tone V30 B3, just delete the Rig but de activate the Autoload function first.
otherwise the Rig will be loaded and the message appears again.
I also assume that the device is new.
-
please open a support ticket, I assume a hardware based issue.
-
If you are working in Performance Mode you can also try to choose the other display layout
-
A staff already replied your email.
Please check your mails.
Possibly you need to check your spam.
-
Du könntest mal versuchen die Ground/Lift Button auf der Rückseite des Profilers zu aktivieren.
Auch würde ich mal eine andere Gitarre checken, da meist ja die Pickups dafür verantwortlich sind.
Eine weitere Möglichkeit wäre es, einen Power Conditioner zu probieren.
-
I don't see a reason to use this graphic eq, but if you like to use it, then I recommend to put it after the Profiler in the signal chain.
-
Have you already tried to clean it with some pressured air or with a small brush?
Possibly dirt or dust inside the socket is responsible for this problem.
-
Genau, nutze den Input Swell Parameter eines Delays und stelle alle nicht benötigten Parameter auf 0, so kannst du dir einen Swell Effect kreieren.
-
Yes, morphing is stored in the effect preset.
-
aus dem Main Manual Seite 253 Kapitel Profiling...
Pegel
Wählen sie den Wert für „Return Level“ mittels Soft-Regler so, dass die Lautstärke des Referenzverstärkers ungefähr der des Referenz-Rigs im PROFILER entspricht. Sie können die Lautstärken einfach vergleichen, indem sie zwischen dem Referenz-Rig und dem Referenzverstärker mit den Soft-Tastern „KEMPER Amp“ und „Reference Amp“ hin und her schalten. Wenn die OUTPUT-LED rot aufleuchtet, während sie den Referenzverstärker spielen, ist der Pegel zu hoch. Audioklicks, die eventuell auftreten, während sie den Wert für „Return Level“ verändern, sindnormal; sie hören die analoge RETURN INPUT-Stufe, die in der analogen Domäne umgeschaltet wird, um einen optimalen Rauschspannungsabstand zu erzielen. Diese Funktion erlaubt es ihnen annähernd jeden Signalpegel zu verwenden, vom extrem leisen Mikrofon bis zum satten Studiosignal. Machen sie sich nicht zu viele Gedanken über einen hundertprozentigen Pegelabgleich; beim PROFILING wird der Return Level ohnehin automatisch auf den Nominalpegel vom PROFILER angepasst.
-
update to the current OS version 5.7.8 to solve this Problem.
-
Have you checked the contacts on the ethernet ports, do they look okay?
Try to clean them, sometimes dust and dirt causes such problems.
What kind of cable do you use? Make sure not to use a cable longer than 8 meters.
Do you use a PoE injector between Remote and Profiler to ensure the power supply?
You can use any ethernet cable up to 100 meters when you use a PoE injector.
-
From the Main Manual... page 223
Other effects should be bypassed during the PROFILING process because they will adversely affect the result, making it sound less natural, and different to the original amp tone. These include: compressors, noise gates, and time/modulation/reverb effects such as delay, reverb, chorus, and so on.
-
Which OS Version is installed on the Profiler, make sure to update your device to the current OS version.
Does an error message appear when the unit crashes?
If yes, take a picture of this message and send it to the support via the contact form on the website.
-
Unfortunately, I do not know audacity.
But connect the Profiler's SPDIF out to the Interfaces' SPDIF in.
Check the output source you like to record on page 1 in the output menu and check that the SPDIF Volume is set to 0.0 and that the SPDIF clock is set to the same sample rate as the interface (page 5 output menu)
-
The "M" indicates that you have assigned a morph value to this parameter.
Regarding Morphing, you will find more information in the Reference Manual page 100