Posts by Peter@Kemper

If this message has only appeared once, you can ignore it.
In your case, the message was generated because there was a problem synchronizing the internal clock of the Profiler with the clock on your computer while the Profiler was connected to the computer via USB.

Output menu page 2 --> soft-button 1 (Main out link)
You are able to link and unlink the different outputs to master volume in this menu.

System menu Page 1 --> Soft-button 1 (Edit Owner)

To set it up from ground level, you could reset the global settings.

Press the System Button while you turn on the Profiler into tuner mode.
Press andhHold the button till the message initializing global settings appears in the display, then let go of the button.
All global settings are now set to the default state, you have to set up the date, time and your name.

• The MONITOR OUTPUT allows to run the amp sound without virtual cabinet, while other outputs still contain the virtual cabinet. Engage “Monitor Cab Off” to switch off the cabinet in the output menu.

You will find a RIG Reference List on the website.

Profiler --> Rig Reference List