Posts by dickjonesify
-
-
The Green Scream can sound pretty good but you pretty much have to pull the Mix back. So glad we have Mix controls on most of the effects.
-
I tweak a lot of parameters to my liking and I find there are some I do very often.
If a particular place I’m playing feels too bright, I usually reach for High Shift in the Cabinet section. I love what it does. I’ve thought several times it would be helpful if I could roll it back and lock it for the whole night instead of adjusting it per slot per performance and resaving.
Same could be said for Definition. I know there’s Main Output EQ but it’s different. More flexible output EQ could fix this issue but locking parameters could still be useful either way.
-
-
I have a delay in Stomp D a LOT for that delay in front of the amp sound. I would love to have spillover for that.
-
Unfortunately, the only way to get two effects’ wet signal in parallel is to use the last two slots (DLY and REV) and turn the Delay->Rev balance control hard right. But right now, the REV slot can only be reverb.
When the new reverb update drops, you’ll be able to put any effect in any slot BUT I don’t know what the fate of the Del->Rev Balance control will be when that happens. Hopefully, there will still be a way to use a parallel loop within the effects section.
-
I have Space at 2.0 and I recently started using it on the Main outs, too. It’s a little strange, I know, but I play live with in-ears and it helps it sound more like a mic’d cab to me.
-
You can’t pan the reverb, sadly. But you could send different parts of the signal chain out two different outputs so that only one would have reverb. Here are some routing options...
External Content youtu.beContent embedded from external sources will not be displayed without your consent.Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.
-
Yup. I have exactly the same issue. First time I do it after loading a rig only. The rest are fine.
I use morphing a lot and have resorted to clicking the ‘bad’ Morph out of the way right away when I can so it’s good when I need it.
-
These reverbs are going to put a lot of people right over the edge into Kemperland.
I have a praise and worship buddy who is currently using the helix and he watched the videos on YouTube, he said if the reverbs sound as good as that, he is going to buy a Kemper.
He has played through mine and absolutely adores all of the amplifiers, and he agrees they are much much more realistic than his Helix… The one thing that’s held him back are the FX
Bring it on, CK!
This is a popular sentiment. Although, after trying Helix extensively, I think Kemper’s Hall reverb is already better. Deeper and more realistic.
These new ones will just be icing on the cake for me haha.
-
I have listened to the posted clips of the Reverb. My question was how was the Kemper output captured to the video? In some of the videos is is obvious that the input was a mic of some type because you can also hear the conversation of those adjusting the parameters. I would like to know how it was captured for those videos that do not contain any ambient sound.
Thanks
The Tone Junkie videos that are in stereo without atmosphere ambience was recorded with a portable 2-track recorder that HW brought with him. I believe it was a Zoom.
-
Not sure if it’s a glitch due to this beta but I can no longer Morph any cab parameters and I know I used to.
-
Tried all of the suggestions thus far and no luck. Activated the -12dB option. Also started the Output volume at -16dB as everyone said would be the “sweet spot.” No dice. Still clipped. I went so far to turn the output volume down as far as it would go and still put out some noise...-30dB and it clipped. Any other ideas??
Even with the output down, it’s still live level. What mixer is it? It should have a pad but *some* mixer inputs are mic only and just wont like unless you use the 1/4” outs and a DI box.
-
Ditch that guitar It can’t be worth the headache it’s giving you haha
But another answer is to push the Input button and crank down the Distortion Sense parameter when you use that guitar. That should help.
-
But but... it does let you do that.
-
I had another weird Morph issue today. The Cabinet High Shift didn’t have the “M” just like you’re saying. No worky.
But unlike the pitch pedal, I’ve done it before and intend to again... very strange.
-
Are you on the Spring reverb beta? I am and I just ran into a different issue with morphing. I might revert.
-
Input settings look normal? Not like cranked all the way? No red lights?
Is the Lock button lit up?
-
@Docmaklang I use morphing constantly and am completely up to date (even including the beta Spring reverb). I’ve not had any trouble with morphing at all.
But, it’s always a good idea to make a backup before updating firmware just in case.
-
I do the exact same, OP.
I use morph for many things so I decided to use the Amp volume to balance my presets with because many times, Rig volume is already automated in some way.
Works great. No issues.