Hast du dir schon mal die Frfr Boxen von Blueamps angeschaut. Da kannst je 2 als Stereopaar koppeln.
Posts by Stefan D
-
-
Just curious. Will you be looking into liquifying existing packs? Would be awesome.
I would also be very interested, at least the publication of the tone stack settings of the profiled amps. And I would pay money for the "liquid extension" for profile packs I already have bought.
-
I would like to still use the TAP button and the Tempo within a rig.
I just want to switch the TAP LED Off or lower the brightness.
This was possible in previous releases, but was changed in 9.x release
Now the TAP Led follows the generic LED brightness
-
... I mainly would like to switch the LED Off
Stefan
-
They already answered (as already stated before) here:
What about this frantic TAP tempo LED?
...but guitarists have a memory like a goldfish. What's next? S.t.f.u. maybe?
(Friendly and non philosophical reminders from time to time should be ok, though)
😂😂😂😂😂
Thanks. For the link, I missed this thread.
-
It would be easy to stop this discussion by Kemper .....
I think everybody would except the answer that it's technically not makable.
At least it would be better than no statement.
Just my two cents.
-
well, I don't care about Haas-effect and/or compensation.
left site is still plenty louder than right side when playing with engaged widener.
Why don't you just add a soft button to edit the volume of the delayed side? everyone could get happy with very little effort
👍👍👍
-
The way I do it: In the rehearsal room I increase/decrease the Volume on the Mixer Channel until my ears are saying "Now it's OK"
To experiment with panning maybe also be an option, but I did not try it.
BTW: When you have mono monitor wedges, the double tracker sounds not really good. I use a stereo monitor box. This sounds OK, even it's not real stereo because the speakers are in one box and too close together.
When You are playing live, it's up to the FOH engineer. to balance the stereo channels.
-
I had a rehearsal yesterday and the man at the mixer confirmed again, that if I use the Double Tracker, one side is always "louder"
or has more gain.
Have a look at this
Double Tracker right Channel quieter?
and especially the post from CK
-
Ich hab das auch beim Stage, aber mittlerweile wirklich sehr, sehr, sehr selten !
-
-
When i use a sound with double tracker (eg TD - Mic Sch from Tribute collection 3) it sounds nice with my studio monitors.
But when i engage my Kabinet (monitor out = master mono) it sounds horrible.
It would be nice if there was an option to bypass the double tracke on mono signals.oh yessss +1000
-
The initial request was:
Performance Mode: Please give me the option to save the on/off state of Pedals I-IV when switching slots within a performance!
Kemper Support #1 Any chance to get this option in near future?
Stefan
-
Just had a look at the Manual Addendum ...
When setting the Stereo button to "-100", would this turn the delayed channel to the left side?
In the addendum I find only this
Controls the stereo width of the double tracking. Plus or minus 100% is regular stereo. Higher values introduce the
super stereo effect.
Thanks
Stefan
-
Just another question to someone from Kemper team ...
I guess the the "Looseness" knob influences the delay time of the delayed (right) channel.
What does 0 to 10 means in ms?
Thanks
Stefan
-
Thanks Christoph for that explanation and the "confirmation" that the right channel is the delayed side.
Now I read some articles about the Haas Effect and the Precedent Effect and learned some new things.
In the rehearsal room the left speaker is closer to me and I guess this is an additional reason for my impressions.
I will trying turning left/right channel .
Suggestion & Feature Request:
What about having the possibility to influence this left/right balance in a certain range?
Maybe in the Rig Manager on the Double Tracker Settings Page having a knob beside the volume knob like:
"Boost delayed Double Tracker Channel" or
a knob "Double Tracker Balance" or something similar.
Again Many Thanks to for the responses and explanations!
Stefan
-
-
This is a known "problem", but it seems that Kemper does not care about.
Any statement from Kemper Support to this?
-
I just checked the YT Demo from Thomas Dill and I have the impression that there is also one channel a bit quiter.
External Content www.youtube.comContent embedded from external sources will not be displayed without your consent.Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.Can anybody confirm this?
Many thanks
Stefan
-
Hi Guys,
I have set the Double Tracker to:
Looseness: 5.0
Stereo: 100%
Detune: 0.0
Volume 0.0
Profiler Stage Firmware: 8.7.10.38833
In the rehearsal room using the PA, I have the impression that the right channel ist a little bit quieter then the left one.
Any ideas from anyone?
Thanks
Stefan