Display MoreIn retrospect, I would have preferred to get a slightly larger enclosure (like this one or this one if you prefer green) and put 4 switches in it. that way, I could use just 2 with one cable but have the flexibility to add a second cable and use all 4 switches. For now I'll just build another identical 2 switch as I have another spare enclosure of that size lying around.
Also regarding switches, I would not recommend these ones any longer:
https://www.taydaelectronics.c…p-foots-pedal-switch.html
Instead I would recommend these ones:
https://www.taydaelectronics.c…switch-solder-lugs-2.html
The reason not to use the "soft touch" switches is I found they don't work reliably with the KPA looper functions. Don't know why, but they work fine for all the other functions such as delay infinity / hold, stomp on/off, browse rigs up/down etc. Just don't work properly with the looper start / stop, overdub functions. Whereas the 1PDT switch linked second above do work fine with all the possible functions you might want to assign. Just my personal experience with these.
I noticed on the 2nd set of switches you recommended they have 3 solder points instead of the 2 on the original how would you connect the wires in this instance with the 3 prongs would you leave one out?