I will after my next (first with the Kemper) gig.
Posts by mollydyer
-
-
I'm seeing some "Am I crazy" type things as well with rig manager. Things like re-ordering slots isn't working correctly, and it seems to want to go out of sync it seems. If I figure out if it's the software or the user (me) I'll post back here too.
-
It could mean "New Preset Management". It could also mean "Kemper Editor". It could further mean "Looks the same but works differently".
I dunno. Looking forward to finding out though.
-
https://www.gearnews.com/tom-k…-digitech-dod-team-fired/
Whoops- sorry, Michael_dk beat me to the same link. I should have read his post more thoroughly.
-
Interesting idea Paul. Note: I'm still learning the kemper. I know that the kemper can send midi out on a kemper-event - I think you can do it when you load a performance or slot- but I'm not sure it can work the way you want it to above.
MD plays to a click/backing tracks (usually) - and we're using a uTrack 24 to drive everything. It's the "single truth" - I'm progamming my patch changes through it. You can likely do the same with mainstage... BUT... I don't think you can do it with the kemper pedalboard. You *should* be able to do it with something not dedicated to the kemper - such as a behringer 1010 or the source audio soleman.
I'll let others who know the kemper better than I chime in though. There's a good chance I don't have it right in my head yet.EDIT: I know this is an older post, but it's a good question I think.
-
Samsung bought them, and then laid off all of the digitech engineering staff.
-
-
If I start getting emails from the remote with it standing next to the Rocky Mountains, snowboarding down Whistler, at a Calgary rodeo or enjoying an espresso in Old Quebec City, I'll be pissed. JUST PISSED.
No way should my gear tour more than I do. -
Yeah... I know. I also bought a behringer 1010 from quebec... and that's delayed. Sigh.
I'll keep my fingers crossed. Or at least placed firmly on the strings.
-
Bought a new remote to go along with my Kemper on November 2nd. It shipped out via DHL on the 4th from Germany, Canada Post's first record is November 5th - "International item mailed in originating country" - and the last update is November 7th - "International item has left originating country and is en route to Canada".
Since then... nuthin'
Other Kool Kemper Kanadians- how long did it take to get yours?
-
Mine just got pulled off the pedalboard (switched to a kemper rack, wanna keep everything in the rack). For a while it was an 'always on' pedal. No noise that I ever caught, but it was ahead of my atomic which also has a great gate on it. I *might* sell it in a while once I've made the transition to the kemper complete and I know all it's quirks/features.
It's a good pedal though. Pity about digitech. -
It's a byproduct of gain and amplification. My Atomic would musically feedback. Actually, now that I think about it, so would my 1101, 2120, GSP21 and even my GSP7 would. In some cases, more easily than my marshalls or mesaboogie would - I assume it's because of the compression.
Now, if it would do it on headphones only... think Freqout... shweet!
-
Yep. That's 100% the plan- I'm switching them all over to CCs from PCs. Lots of tracks to edit though.
-
Aha. I see what you're saying:
To be clear - I'm not using a midi pedal board, I'm using a midi track. And it's already programmed.
I was trying to keep the idea simplified above. In reality - iIt would have been very handy - for me, to be able to assign
PC 1 for performance 1, slot 1, and PC 6 for performance 1 slot 2.PC 2 for performance 2 slot 1, PC 7 for performance 2 slot 2.
PC 3 for performance 3 slot 1, PC 8 for performance 3 slot 2.
PC 4 for performance 4 slot 1, PC 9 for performance 4 slot 2.
PC 5 for performance 5 slot 1, PC 10 for performance 4 slot 2.
PC 11 for performance 6 slot 1, PC 16 for performance 6 slot 2.
PC 12 for performance 7 slot 1, PC 17 for performance 7 slot 2.
and so on.
I'm coming from a fully automated Atomic Amplifire 12 rig, and this would have let me get up and running without changing the automation.
Right now, as it is, I'm redoing all of the automation midi tracks to take better advantage of the Kemper, but I would have been set up and running with it already if I could map midi performances.
I suppose this will, in the end, be a moot point for me - by the time anything gets implemented I'll be fully indoctrinated into the "Kemper Way", but it would still be a handy feature.
None the less. Great list.
-
Hi, actually, given that you can already connect a keyboard to the zkemper, this would just entail code to allow a Bluetooth device (such as a Bluetooth keyboard, or maybe even a foot controller) interface with the Kemper.
When you say map programme changes, do you mean midi PC? That would be covered under the midi improvements suggestion, but I’ll mention this in the first post. Could you elaborate though? We can already transmit two PC numbers in performance mode.
re Bluetooth- ah ha. Gotcha.
re MIDI- Map PCs received, not transmitted.
Let's say - for argument sake- I had 60 songs in my set list. 60 Performances, in this case.
It would be amazing - for me - to be able to map each Performance to a specific midi PC. (Personally, I'd set it up as "Song 1, Slot 1 = PC 1, Song 2, Slot 1 = PC 2... Song 60, Slot 1 = 60). That way I could scroll through the set quickly. I'd still want to use CCs to switch between slots. -
Hey 397f7c95538961c9090da40b2b0b6e229b278069, thanks, I'll add bluetooth to the list. I won't add the first two though, because that's hardware and I thought it prudent we limit this just to the Profiler Version 1.
Hey- Bluetooth would also be hardware. May I suggest instead the ability to map program changes for performances?
-
-
-
-
