Yes, this will work basically.
The only problem that might arise with this special setting, is that the TS outputs have a very high volume, when the Kemper Power Kabinet is driven to high wattage in "Kone mode". This would potentially overdrive your pedals and create unwanted distortion.
In that case I might just get the fender fr12 since I have to run the wet effects post since there isn’t a fx loop in the player.
Yes, absolutely.
Cool! This came out at a perfect time as I am wanting to build my pedal board back as I have opportunity to play some live shows (mainly use Kemper rack at home). Was thinking about Iridium or UA Dream but I love my Kemper profiles so I think this might be the better solution for me and either pair it with powered Kemper Kabinet or Fender FR12.
If I put my wet effects after the player can I still take the last pedal output to Kemper Kone and use imprints?
not sure what good is half time mode but that is sad it is only 30 seconds.
When I test using my Rack and a footswitch, it appears the looper is capped at 30 seconds.
Found that that even though the remote section is grayed out, I can still change the looper volume level.
The only issue that I see now is that the looper restarts after 30 seconds. I thought the looper was supposed to allow up to 60 seconds?
Now just to figure out how to adjust the looper volume level since it is too loud. I see there is an option under page 12 but it is greyed out since I am not using the remote.
I got it to finally work by hitting the calibrate button 
So the foot switch is a stereo jack.
The TRS cable is correct but is the switch a "stereo" switch or a "mono" switch? (Does it have stereo jacks or mono jacks)? The TRS would require a stereo jack to work both signals of the TRS cable.
I bought the following dual switch and cable:
https://www.amazon.com/MOSKY-S…-Footswitch/dp/B07JG6PWX3
https://www.amazon.com/dp/B003…o2ov_dt_b_product_details
In the system menu I set the pedal to be a dual switch with the looper start being the ring and the stop being the tip. The issue that I am having is that the ring works but the tip does not. Did I buy the wrong cable?
I am waiting as well on the answer to this. At least a rough estimate like 6-8 weeks.
It would be nice if you could collapse all folders in Rig Manager. I have so many profiles so I sorted the folders by Author->AMP Maker->AMP MODEL YEAR. This makes it easier to navigate.
I found it, maybe they moved the folder but incase anyone else is wondering:
C:\Users\<YOURPROFILE>\AppData\Local\Kemper Amps\RigManager\Local Library
Is there an easy way to move folders around in Rig Manager? I used to be able to go into the Kemper folder in Documents and move things around but it looks like they went away from having the folders in File Explorer to managing it in a database (which does make it easy now to backup).
I would just get a Mojo cab (can get it with same colors as Kabinet) and stick a Kone in it. That is what I am about to do. It would be a better quality cab and probably save you a few dollars as well.
Cheap solution is getting a BAM200 power amp. There is another thread with settings to get it to have a neutral curve and sound identical to the SD 170.
I have the unpowered rack. I am probably just going to custom build a mojotone cab with Kemper kone and use a BAM200 amp. Worst case if I don’t like the BAM I will return it and get the SD 170. I am going to mount the cab in the studio monitor rack underneath the Kemper rack.
Any more people try the BAM200? Wonder if I would even tell the difference between it and the SD 170 if I used the settings that were posted earlier. Just trying to get that amp in the room feeling and tone.
My 215 needs to be replaced because one of the drivers is going out so I was thinking about getting some better IEM.
