maybe too obvious but, check only the kemper connected only with the headphones. if you have the same noise, you have to work with the profiler. if not. just check adding one by one the cables to isolate and identify the problem
Posts by jprmusicman
-
-
a fuzz factory emulation will be cool!
-
im going to play in europe and I don't know if I have to use a converter to my kemper stage. my kemper is working properly in usa. any clues?
-
Guys Im searching a preset to copy the wizard wah (or RMC 4). Any clues here?
-
plus delay in miliseconds for each side
-
agree! +1
-
Absolutely agree with this. There is not a 80's Luke/landau sound without a micropitch - and +
-
What about a fuzz with gate emulating the famous fuzz factory from zvex?
or?
-
Im just curious about having DI/studio preamps and which profiles are the best on this area.
-
-
It would be nice if we could run a couple more delays, but that is not possible (unless you use an external effect too). His sound is more about the effects filling space, you do not need much of the effect.
Here are the effects and settings I use for a Pat Metheny sound. I play a Gibson ES-175, or Ibanez PM20, both with flat wound strings.Rig: (you could use a JC120 if you like)
/13 JRT9/15 (MBritt)Effects:
Air Chorus depth 1.9, Crossover 1335 Hz
Free Delay, mix 3.3, Time 453ms, Ratio 4.4, Feedback 4.7, Bandwidth 1.3, Center Freq -2.5, Modulation 2.5
ducking and volume 0
Reverb Hall, mix 13.4, balance 0, time 0.8, damping 5.4, pre delay 81ms, bandwidth 2, Frequency -1.5,
ducking 0, volume -1.1Eq your amp as needed, enjoy
I don't found any "free delay" with that options on kemper, could you be more specific on this?
-
a sustainer/feedbacker
a "strymon deco" kind of effect
a better version of univibe
a independent and assignable volume control for all outputs
a detune effect with + and - cents at the time
a microseconds time for delays to better spread effect
-
Is any way to assign a volume pedal to a specific output only?
-
i have a expression pedal already used as wah/volume. im trying to use another to control mix on verb-delay. could I do that? and how?
-
agree. I suggest a pitch shifter going not only up in cents, going down too.
EX. +12 cents and -11 cents. that in one block
-
We need this!
+104944478403020927245678902456
-
Is any way to filter merged, di, studio profiles on rig manager?
-
how I could anchor the pad to the output?
-
any way to have both channels (dry-wet) at -12 if I activate that option?
when I use that is only lowering volume in dry channel.
-
The pad level is stored in presets.
Could you explain deeper?