Do you use a Wah?
Check the Wah-Settings and move the pedal to the off-position.
Do you use a Wah?
Check the Wah-Settings and move the pedal to the off-position.
Finally
...
I would say one thing, I don't miss the Kemper, I do miss the community though.
Mike
Stay in the community an hold the line?
I agree and as I use the Stage, I wish to program buttons on Stage via RM.
To find out if there are different settings: Copy the Performance to browser mode and compare them in browser mode. If they sound different, it must be a setting in the rig (amp-, stomp, fx, cap-setting). If they sound the same there must be different settings in input and/or output-menue in browser or performance mode.
Perhapst you must install first 7.32. Look here Update.
Be aware when controlling the output volume with expression pedal to overload the FOH.
I sold my tubeamp and the board some weeks after I got my stage. I never missed the analog gear;-)
Sorting out is confronting with the dogma! For instance: you can't sell things attached to memories.
"Yes we can!" And we gain some freedom....
Make shure both units are on same OS. Make a backup using a stick and restore the backup on stage.
My recommendation for a starting point: Marshall 68 Superbass-Profiles by Martin Suijs. You find them in Rig Exchange. There are several Profiles with different settings. Also the Fender 64 Bassman-Profiles bei Martin Suijs maybe a good starting point.
Try the softbutton "Reverse Mix". Turning it to the right side it will create a reverse delay. In the manual it is described.
What the OP is after is to pre-arrange performances into "set lists" and therefore select " set list 1" with the performances arranged in a certain way and then " set list 2" etc. It would be an easier way to manage if you use the KPA in this way.
I would use RM to arrange several set lists in seperat folders. Each performance - name starting with the number of place in the set list. Before a gig you can copy the relevant setlist to the KPA.
Possibly a corrupt kaos.bin. Download the firmware again and give it a try.
I make a project-folder where I store every rig I use for the project. When project is finished, I export the folder to my backup-system. This workflow allows me to bring back every rig I used for a special project/song....
Yes, Sir!
lol
RM crashes the internet: you are responsible for this...
It appears that when you first press a slot button the lower light of the two illuminates. If you press the same button again before pressing any other slot button the upper light illuminates and the lower de-illuminates. What is that about?
With the 2nd hit you activate the Morph-Functio .
I think he did‘nt remember the lyrische of 3rd verse: „all I got is three chords and a red guitar....“
Download it again. Maybe corrupt file.