Ich denke dabei auch eher an den Soundcheck: mal schnell das Delay oder Reverb anpassen kommt schon mal vor....
Ansonsten hast du Recht, das ist Stress
Ich denke dabei auch eher an den Soundcheck: mal schnell das Delay oder Reverb anpassen kommt schon mal vor....
Ansonsten hast du Recht, das ist Stress
ich habe schon fast vergessen, wie man das alles auf direkt auf dem Profiler macht. Der RM schafft Überblick und ist für mich leicht bedienbar.
Das birgt die Gefahr, dass du bei einem Gig nicht in der Lage bist, Einstellungen am Profiler vorzunehmen. Ich nutzt von Zeit zu Zeit auch die Einstellungen am Profiler, um nicht aus der Übung zu kommen.
In Output Menue the 3. softknop.
Yes, I have "Master Mono" all the time
You set it to "Send 1 Outout" or to "Main outout" or "Monitor Output"?
What are your settings for dircte output? You find it in Output-Menue on page 1. Try to set "Master Mono".
It is described on page 104 in the manual....
Unter My Profiler sind die auf deinem KPA gespeicherten Rigs, Presets bzw. Performances aufgeführt. Diese sind nicht unbedingt auf deine Festplatte gespeichert. Alles, was Donauwörth deinem PC gespeichert hast, wird unter Local Library aufgeführt.
Damit ist klar: am Profiler kannst du nicht in das Verzeichnis Local Library wechseln.
Änderungen, die du am Profiler vornimmst, sind nicht in der Local Library. Dazu musst du das Rig, Preset oder Performance in die LL speichern.
Perhapst your smartphone disturbs. It sounds like this to me.
Danke IngoRockt, daran hab auch schon gedacht, direkt aufs Motherboard. Allerdings hab die Anschlüsse wieder hinten. Wollte eigentlich sowas wie ne USB-Patchbay auf`m Pult um ständig wechselnde Gerät ohne Turnübungen zu stöpseln. Kennt jemand sowas mit direktem Slot-Anschluss?
Leg doch einfach 4 Kabel von der Karte auf das Pult. Dann hast du alle Möglichkeiten.
Wenn du einen Slot im Pc frei hast, dann baue dort eine USB-Karte ein. Sowas z.B.
Try to morph the amp-gain.
I was going to use morph to boost every slot to a lead volume using rig volume as a control, so my clean sound can have a clean lead boost crunch can have it's own level of lead boost etc.
That's also my way to boost for solo. I did not notice an effect on the FX section. Perhapst because I don't use FXs that are sensitive to more volume.
Try a Fender-Profile (search the profiles from Martin Suijs in RM). Take a profile with some gain and turn back vol and tone on your guitar. Ad some reverb perhapst a bit of delay and it should fit.
No no, they is one in the world not using "copy-Paste" fuction like other, it is Kemper
I understand "Kemper is right other world is wrong"
The only solution is creating personal Nr to avoid Kemper bizzare database
The Kemper-workflow is logical: Usually a Performance is setup for a special song or a special situation. In case of one performance for each song in the setlist I name the slots with "Intro, Verse, Chorus, Solo, Outro" or something like this. In your logic you change in one slot (f.e. "Solo") a rig to get a better fitting to your sound, the name of the Slot will change from Solo to the choosen rigname.
For me that is not the way I want to act.
In case of setting up a new Performance with the given Effects and Fx of another Performance: Lock the Effects an FX and build up a new Performance by copy and paste the rigs into the new Performance. Don't forget to unlock before saving.
If you are a handyman I recommend this
Have you tried to lock the mod/x?
Your interface has a TOSLINK input. The Kemper has coaxial SPDIF. You need a converter to run the system as you want
Check out if your interface activates an micro-preamp when using XLR. If so, use a simple TR.
What is pictured on them? A sock face with a cigarette? Or what is it?
I checked it on my wallet-pick: it looks like a sock face with a cigarette. Maybe a portrait of Keith Richards? But I can't find facial wrinkles
How about Chicken Picks? They have a lot of different sizes, shapes and thickness, and I can confirm the sound and feel of the different picks is significant.
I recommend tht Chicken Picks. All the money worth.
Using FRFR the Cap must be on. Remember that the profile with Amp and Cap is the microfoned output of the profiled amp. Switching Cap of will need a real Guitar Cap to compensate the lack of Cap in KPA-output.