Habe jetzt die Antwort hier gefunden: http://kb.esi.ms/KB00272DE
Sind "Realtime" und "Direct Monitoring " jetzt unterschiedliche Funktionen?
Habe jetzt die Antwort hier gefunden: http://kb.esi.ms/KB00272DE
Sind "Realtime" und "Direct Monitoring " jetzt unterschiedliche Funktionen?
Vorsicht mit dem ESI U24 XL!!!
Dieses Gerät kann nicht den digitalen S/PDIF Eingang direkt zu den analogen Ausgängen routen (Direct Monitoring)!
Wenn du also den Profiler via S/PDIF anschließt, dann kannst du das Signal NICHT direkt via Kopfhörer oder Lautsprecher hören!
Hören kannst du nur, wenn du eine DAW hast und dort dann das S/PDIF Signal wieder Richtung Ausgang schickst, mit deutlicher zusätzlicher Latenz (Verzögerung).
Habe jetzt nochmal das Manual konsultiert und da finde ich:
The Mon button (located between INPUT and OUTPUT) allows you to enable realtime input monitoring. Once enabled all incoming signals are audible through the output. With the Analog and Digital buttons on the left of the panel you can select the input source for input monitoring.
Wenn ich das richtig lese, dann kann ich doch in Echtzeit mit abhören. Oder lese ich das falsch?
Vorsicht mit dem ESI U24 XL!!!
Dieses Gerät kann nicht den digitalen S/PDIF Eingang direkt zu den analogen Ausgängen routen (Direct Monitoring)!
Wenn du also den Profiler via S/PDIF anschließt, dann kannst du das Signal NICHT direkt via Kopfhörer oder Lautsprecher hören!
Hören kannst du nur, wenn du eine DAW hast und dort dann das S/PDIF Signal wieder Richtung Ausgang schickst, mit deutlicher zusätzlicher Latenz (Verzögerung).
Danke für diesen Hinweis!
Ich wollte den S/PDIF Ausgang eigentlich nutzen, um eine zusätzliche Aufzeichnung des Gitarren Signals in meiner DAW vorzunehmen. Für Monitoring nehme ich einen der anderen Ausgänge.
Geht das dann?
Ggf. auch für Reamping?
Hallo zusammen!
Ich würde gern den S/PDIF Ausgang meines Kemper nutzen.
Doch anscheinend brauche ich dafür spezielle Kabel und auch ein spezielles Interface/Mixer.
Mit einem normalen Cinch Kabel und meinem Behringer Xenyx Mixer hat es nicht geklappt.
Was ist zu empfehlen?
VG, Adrian
Thx for Your hint. After I installed the right version I found everything like in the explained video.
Hi,
I just was watching the video about the Kemper Fuzz found under Kemper Profiler Tutorials. https://www.youtube.com/watch?v=KBdI-dBaNxI
There a number of presets are used (f.e. OCTAVIA MID)but I cannot find those presets anywhere on my Kemper, on Rig EXchange or in the Downloads section.
Am I missing something
Really would like to try them out.
Best,
-Adrian
Hi,
maybe a simple question, but I didn't find an answer for.
Why are my uploads not visible in Rig Exchange?
They are visible on the upload site.
Best, Adrian
Hi,
I want to try to create the sound of the Scottish band BIG COUNTRY, which is relying heavily on pitch shifter/harmonizer.
I found information about the BC setup here:
http://www.bigcountryinfo.com/tabs/onegreatthing.htm
The most important one is a pitch shift which mixes +1 octave and +7 semitones with the original sound. And here:
http://www.stuart-adamson.co.u…untry-pedalboard/12/2011/
The amp that was used: a Fender Dual Showman with 2x12 Fender speaker cabinet.
How do I start out for this task?
As I a am still a Kemper newby, every tipp is very welcome.
Best, Adrian
P.S. And yes, I saw the free BC profile but want to try to experiment with the Kemper and see how far I will get.
Hello everybody,
have just received a "small" parcel from Thomann and now I'm spoiled for choice ... three guitars:
- a Gibson Les Paul Classic 2019
- a Harley Benton SC-500 and
- a Harley Benton SC-550 ...
Have now jammed with all three using my Kemper and a favorite Michael Britt profile of mine (Colony 2 9)).
Here is the playlist: SoundCloud Playlist
Can you identify the real Gibson?
And what about your ranking?
I'm curious.
VG, Adrian
If you have Rig Manager already open, you'll have to close it, and then open it again to refresh the Rig Exchange list.
That was my problem. Got it now! Sounds great. Thx a lot!
Hi!
The profile sounds interesting, just what I am right now looking for.
Couldn't find it on RE though.
Maybe I am too quick and RE needs some more sync time?
Best, Adrian
Here is the link to the sellers page on eBay:
https://www.ebay.de/usr/renamock
Though the profiles are not advertised right now, You can contact him to get them for 10 €.
That is what I did.
Hi!
Where you've found the profile?
Thanks!
Found it on eBay. Can post the contact details of the seller, if You like.
Everything's working now. Thx again for the responses.
Thx for the input!
The problem I am having right now is the following: I want to use the Bagpipe delay, but somehow I cannot manage to get it selected.
I see it in the list, but the Kemper always "scrolls" over it, dosn't let me load it.
Hi all,
I was wondering if there is no stomps & effects tutorial video for the Kemper available.
There is a video about the amp section, there is even a video for the noise gate wheel.
But I was not able to find one for the stomps & effects section (or the rig as a whole).
And I find the sections and working with it more complicated as the noise gate wheel, which to me is quite obvious.
Could anyone point out one to me, if it is only me not able to find it?
Thx a lot.
Best, Adrian
Update: Got some profiles of the Duesenberg Berlin Amp … thx to the Internet...
And I am quite happy with it. Some sounds here:
I have to correct myself: It's the "AV Catalin" profiles that have a very strange whistling / hissing going on, not the H&K!
Hi,
I produced some new profiles for the Catalinbread Galileo (attached).
This time I used my "very clean" VOX AC30 VR amp (clean channel, no reverb, no chorus) as basis.
I think the results are way better than with the H&K Black Spirit & clean channel.
What do You think?
Best, Adrian
Thx for clarifying.
And indeed, the Catalinbread Galileo is a very noisy pedal (but I like it).
Has nothing to do with the Kemper.
And besides the (very nice) Duesenberg Caribou (2013!?), I own some super newby friendly Harley Benton guitars, too.