Thanks man, im gonna try it out!
Posts by gitaarmike
-
-
Hello ,
I was wondering if I can hookup a bluetooth receiver to the send and return 1 of the kemper (aux) and use it to play backing tracks wirelessly from my phone to my headrush speaker that I have hooked up in the monitor out?
I this possible? So that I dont always have to have use those annoying iphone lightning to 3,5 mm adapters.
something like a Logitech Bluetooth® Audio Receiver
-
I have Rokit 5's and my toaster sounds "great" at low volumes, even if going through my audio interface.
Hmm, maybe because the 5's are a bit smaller?
For low volume work it seems like it would be better to send the Kemper at full volume to make sure the speakers are getting a strong signal.
Thanks, im gonna try this since I have the kemper master volume usually quiete low. Is that allright? Or should the kemper volume be maxed out?
-
basic physics and anatomy dictate that our ears are more sensitive to some frequencies than others and this changes in a non linear fashion. Our ears are less sensitive to lows and highs at low volume than they are to mids. Therefore, as you turn down the volume we perceive the sound to be more mid heavy which often translates to dull/muffled/bad. However, if we set the sound to be pleasing at low volume it will have way too much bass and treble at higher volume. That’s why so many bedroom players use the classic V curve graphic EQ shape with all the mids scooped out. They sound god like in the bedroom but then get totally lost in a live band mix at higher volume.
as previously mentioned read up on Fletcher Munson or Equal Loudness curves and all will become clear.
basically you need to different EQ settings. This can be done by putting an EQ in one of the Effects blocks or by tweaking the Output EQ (which can be saved as a preset if you want).Thanks for this. It seems I can resolve the issue by making seperate low volume patches for noodling at home. For example i love a super reverb profile at low volume but when i turn it all the way up it is just too much.
-
I think you're just experiencing the fact that louder (to a point) sounds better. I'm not being cheeky - it's real and not subtle. There's no way any amplified guitar is going to rock your world at acoustic guitar level
I agree, but has anyone ever played a yamaha thr10 for example? That thing sounds great at acoustic guitar volumes. So it is possible.
I dialed the patches in at higher volume and at low volume they sound like shit, is there a way or a simple tweak to make it sound good at low vol? Or make a seperate set of patches/
-
Hello,
My Kemper sounds bad at low volume with studio monitors and good at high volume. I have KRK rokit 6 monitors.
Is there any way to fix this? Are my studio monitors bad? Should i add a subwoofer. What can i do?
I really like my kemper but it is such a pain that IT doesnt sound good at low volumes.
Greetings
Michael -
Yes I bet it is alot of work. It looks really great though. Just subscribed on your youtube channel !
I want to do this myself, use your video as an example
Would a canon eos 250 dslr camera enough to achieve this effect? Do i need to buy a seperate 50mm lens or would the 18-55 IS kit lens be enough?
-
Sounds great, great playing too. Random question, how did you make the background blurry? Looks cool.
-
Sounds great man! Great playing as wel. Do you remember exactly what profiles you used?
-
Hello,
I was wondering, does anyone know if I plug my kemper stage into a hotrod deluxe (via the fx loop) will I be able to use the fender spring reverb? Together with the kemper ?
This seems like the best of both worlds to me.
-
Hi gitaarmike,
This seems to be the cheapest pedal sized power amp out there.
https://www.bax-shop.nl/gitaar…daal/product-details.html
44 Watts which should be powerful enough to use at home.Thanks man! Not sure I need a poweramp since I now figured out you can basically use the power of any guitar amplifier by plugging it in the fx return
-
try the Fan Spring Preset as a staring point and tweak to taste. The Spring Reverb model on the KPA os damn good.
If you want the old school dripping in reverb fender sou d put the Spring Reverb in a Stomp Slot before the amp stack. If you want a more modern spring reverb put it after the stack section
Damn this sounds really great! Thanks for the suggestion. This was the sound I was looking for man.
-
I will try it out, thanks!
-
Well, i think i found the solution.
I plugged into the fx return of my katana 100 combo and it sounds great at low volume in my house. I didnt know you could hook the kemper up to a guitar combo in this manner.
At the next band practice, I am gonna plug it into the 4x12 in the rehearsal space, in the fx return of the amp head. I am sure it will sound epic.
The only thing I am still missing though is finding a reverb sound like in a deluxe reverb or super reverb or something.
But I am guessing I will need to find a good reverb pedal for that.
-
Thank you!
Does anyone have any thoughts on cheap power amps? They arent easy to find here in Holland.
Would this work with the kemper , for example?
https://www.thomann.de/nl/seymour_duncan_power_stage_170.htm
-
Hello Everyone,
I want to play my profiler stage trough an guitarcab and external poweramp. But I cant find anything in the manual how to hook this up.
So does anyone know how I hookup and external power amp and guitarcab to my kemper?
I'm gonna try this out in a music store because I am not quite happy playing trough an FRFR speaker at band practice.
Greetings,
Michael from Holland.
-
Hi Everyone,
I am trying to make a patch for the RHCP song cant stop on my profiler stage.
I'm having the problem that the fuzz is to loud compared to the clean tone, i allready have the fuzz set al volume -5 , it is still to loud and cant reduce the volume any furthur.
Does anyone know how to get the volume below the -5?
-
thanks! i will give it all a try.
-
Hi everyone,
I was wondering if there are any good profiles that include effect.
Like profiles suited for a certain song.
For example i am looking for a lead sound for all along the watchtower, and a lead setting for a gary moore sound and some patches for purple rain by prince
I have found some good amp tones, but no all ready to go, lead patches with effects and everthing added.
Are these profiles out there?
Greetings
Michael from Holland.
-
Hello Everyone,
I am a happy user of the profiler stage. I am trying to make it work to record via Spdif to my focusrite 6i6 interface.
But how would i set the connections? I would think i send the spdif output on the kemper to the input on the interface.
But the guy in this video ( at 4.28) has the output of the profiler stage connected to the output of the interface
and the input of the profiler stage to the input of the kemper. Is this correct? This seems weird to me
External Content www.youtube.comContent embedded from external sources will not be displayed without your consent.Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.Greetings,
Michael from the netherlands.