Hi and welcome!
Merry Christmas and Happy New Year to you Glenn!
Hi and welcome!
For almost two weeks I've tried connect my Kemper to my MacBook Pro. I use the Rig Manager Beta Version 3.0.79 (15575) and OS Beta 184.108.40.20662B.
I've tried different USB ports and USB B cables.
The Mac can't find the Kemper.
Should I reboot the Kemper? I'm afraid of loosing all the profiles...
I really go nuts! Can anyone help me?
You've successfully installed the OS Beta but now you can't connect the Kemper (model?) to your MAC, right?
Not sure if i need the bar (although it'd be nice), but definitely the before and after values.
From page 179 of the Kemper main manual v7 is a diagram showing an example of steps and harmonised voices.
The steps are the chromatic intervals of the chosen scale, whereby Step 0 is the tonic (in this case Ab) Step 1 would be A , Step 2 would be Bb, all the way up to step 11 which is G.
Hope that makes it clearer .....
That's better mate, thanks. I was looking at it today (in the manual) but couldn't figure it out. Now it make more sense. Thanks again, much appreciated.
seems to me like straightforward F minor harmonized with an octave + third above.
No user scale necessary, simply select Ab/Fm as key and Oct+3rd as interval.
User scales are needed to harmonize scales other than what is most often called major/minor (ionian/aeolian) and all related modes.
As soon as you move to melodic or harmonic minor and their modes, you'll need User Scales. Or for symmetrical scales, or so-calles 'exotic' scales, or 'special' purposes, like harmonizing every note with let's say an A, to create a faux drone sound like a bagpipe for example.
Thanks @DonPetersen....it wasn't so much this song and yes i have a few song with harmonies that are straight forward and no issues with them at all. I was trying to get my head into the users scales and it was this song I was noodling around. Anyway, I'm not sure about the whole step thing and just want to learn how this works.
@lento1234567 has provided a good example, now i just need to understand how the 'step' thing works.
Hello, after a quick listen it is a fairly straightforward major and minor third sequence for the opening riff.
I assume you will play the fundamental.
In this instance, choose User scale 1 + 1 Oct and set the key to Ab/Fm.
Going in to Edit Scale 1, you'll see the associated steps and the intervals which you need to input
Step 1 = 4
Step 6 = 4
Step 8 = 4
Step 10 = 3
Edit all the unused Steps to 0 (to avaoid any false harmony triggering)
Hope this helps .....
definitely not like what I did (hence it doesn't sound right at all!) ...and didn't think of setting the unused steps to zero either. What I still don't quite get is the 'step' thing. Looking at yours you have Step1 then 6 the 8 then 10...that's still confusing.
can someone explain how to create a custom user scale?
I've read the manual and tried to create one, but I'm struggling
with the concept and it sounds weird?
Just t o give and example. I was working on the song
Holiday by Green Day.
Quale versione stai usando? Se è successo solo una volta, non mi farai venire il mal di testa. Se invece succede tutte le volte che lo accendi ci potrebbe essere un problem. Hai provato ad installare la beta?
Hi guys, good to meet you.
No issues with RM beta 2 on my iMac 10.15.2
Allowing for the Fletcher Munson Curve:
All you need is 4 bands of EQ. This can be internal to the Kemper or an external Pedal.
Build Patch without any EQ that sound good at low volume:
When You Go Loud Apply the EQ as Follows:
1 = 150 HZ - 12.8db
2 = 3.95 kHz + 3.6db
3 = 8.0 kHz - 7.7db
4 = 9.3 kHz - 12.6db
The Other Way is to Build the Patches that sound good at low volume with EQ ON:
Build Patch with this EQ on:
1 = 150 hz + 12.8db
2 = 3.95 kHz - 3.6db
3 = 8.0 kHz + 7.7db
4 = 9.3 kHz + 12.6db
Then when you play Loud Just Turn The EQ OFF!!! and you're at least close enough for Rock N Roll
Hope this helps. This was a tip given to me a long time ago back in my Line 6 days, but it always works when going from bedroom volume to gig volume.
I am pretty sure this should work even with Axe-FX, Kemper as well
This has me intrigued...nice one mate, I'll give this a shot.
Just released 3.0.79 beta with the following improvements:
- fixed: crash in startup on macOS
- fixed: crash on quitting Rig Manager while editing an RX Rig
- fixed: crash when editing while multiple windows are open
- fixed: startup crash on Windows 8
- fixed: performance tempo could not be enabled/disabled on macOS
- improved syncing with PROFILER
Thanks mate, just staring my working day but eager to try this arvo