Grazie @Sollazzon...sembra un po Marshall'esco.
Posts by jarabuandi
-
-
Hi all,
here's what happens....I'm in 'Browser' mode (on the Stage) checking out a profile which I have imported in RM with the following AMP settings: T=-0.5, P=-1.6 and Rig Vol= +3DB.
I lower the Rig Vol to 0.0DB and hit the 'Rig Store' button in RM. I then select a different rig come back to the modified one and now the AMP settings are as follows: T=0.0 and P=0.0 and Rig Vol=0.0.
Is this the intended behaviour??? Can someone please try it and report back?
Thanks
-
Tone God Profiles (user name here is "morimagic") gave us a freebie some years ago that may be of use to you. It may not be Steve's ray gun noise, but it's the sort of thing the creator was aiming for IIRC.
The Rig is attached to the first post:
TG - Blaster Sound Effects - Free rigs and profiles - Kemper Profiler Forum
Once again, the 'keeper' of all KPR rigs has done it again... You're a serious legend, mate! Thanks!
-
It happened to me too once....just selected another folder in RM and that's sorted it for me. I didn't have to reboot my Stage nor RM.
-
Hi and welcome!
-
Hi and Welcome. I'd suggest to start with RigManager. There's plenty of free profile (>17000!).
-
Thanks for sharing, mate!
-
Welcome aboard Kevin!
-
-
Thanks for sharing mate!
-
Hi, you should probably provide more info. MacOS version, RM version, KPR model and version.
-
-
Thanks mate, I like it
-
This is what I’ve come up with. I know it’s not the best idea but I think it’s better than nothing. I plan on using it until I come up with something else. I can’t reach the tuner or looper switch with the cover on so my plan is to either:
A. use a different tuner
B. this weekend I’m going to try swapping the tap and tuner functions to see how well that works
More details please....did you make this? If so how? What did you use?
-
Thanks mate.
-
Hi Jason, what cab did you use to profile this amp?
-
Hi Jason, thanks again for sharing these profiles, mate. Created a new Performance with the HF Cali - No Clip 1
Sounds really good for some pub rock covers!
-
-
Thanks mate, much appreciated!
-
I was going through all the 20 new KPR Fuzz....and I'd like to suggest something for future RM improvements.
1) In RM/Performance mode: when you select one from the list, it's now loaded into the slot but there's no way to tell which Fuzz is selected. If i had say 5 different performances with 5 different Fuzz how would I know which Fuzz is loaded in a given performance (unless I miss something)?
BTW same goes for all the KPR Drives
Possible solution: a description under the slot that shoes what Fuzz/Drive is loaded
2) In RM/Performance mode: right click on the Fuzz and you have to go through the whole menu (Distortion/Kemper Fuzz/list of Fuzz) before being able to select a different Fuzz. Same goes for the Kemper Drives.
Possible solution: right click on the Fuzz/Drives and only show the that menu
TBH, I'd like to see point 2 implemented for every effect (exception being the AMP)