Main Manual 8.5, chapter Effect Loop (Pink), page 270!
Posts by vjelen
-
-
In Brower mode Found a AS Mars MP gain 8 i like. Im new to Kemper How do I transfer that to Perform mode and assign to pedals 1-5? Thanks KJ
Download Main Manual 8.5 and you can find everything (and much more) there!
-
This is what Kemper web download page says:
PROFILER Operating System 8.7.10 Release for all PROFILER models
USE THIS OS VERSION FOR ANY PROFILER™ MODEL
Rig Manager 3.2.72 for Windows® / macOS® and 1.2.0 for iOS® required!
PROFILER Stage™ users can immediately upgrade to this revision regardless of their current OS!
To upgrade PROFILER Head™, PROFILER PowerHead™, PROFILER Rack™, and PROFILER PowerRack™ via USB memory stick from OS versions before OS 7.3, OS 7.3.2 needs to be installed first! Older versions than OS 7.3 on these models don't recognize this new integrated OS revision. For this purpose OS 7.3.2 can be found on the Download Page at Older Software Versions:
-
Did you save the performance in performance mode? Not in browser mode! Rigs in browser and performance mode are different and you have to save them accordingly.
-
... And for all the haters: It is not in the guide!
Well I don't feel like a "hater" but when you said "guide" do you really mean Main Manual 8.5??
-
Hello, unfortunately I don't know how to save the effects on the remote. If I assign them, then switch to another channel like Crunch, all assignments are gone again.
Does anyone have experience with this?
Download and read Main Manual 8.5 and sorry for the like, it was my mistake
-
1. Don't go down the profile rabbit hole. It isn't necessary. Learn how to adjust things to your liking and really figure out how the unit works.
2. ALWAYS tweak your profiles at the volume you will be using them at. You will end up with different profiles for live vs recording if you do both.
3. Watch all of the videos on the Kemper site and then go watch every thing Tone Junkie has. I did this when I got my Kemper and it was invaluable. They cover so much stuff and make it so much easier to learn how to adjust things so you can avoid number 1.
4. BONUS, Use the manual. It is full of tons of great information. Many people ask questions here that are detailed in the manual.
Fully agree, just small clarification to point 4. We are talking about Main Manual that you have to download from the Kemper web, not the manual that comes with your KPA. You can download it here Main Manual 8.5
-
-
Absolutely. I can barely speak my first language properly. People that speak and write two or more languages have my utmost respect 👍
-
I am experiencing the same issue of lost sound. However, my input and output levels were not responding as I kept playing. This started happening after I applied the 8.7.7.38467 update. I then applied 8.7.838522 which supposedly addressed the loss of sound problem. Then yesterday at church, it happened again twice. Same problem. This morning I am trying to update to 8.7.10.38833 which includes the 8.7.9.38696 which addresses "rare accidental loss of sound" thru Rig Manager. The update itself has failed to apply with: Error occurred while updating profiler. Please contact support...
Is it possible to go back to update 8.7.6.38112 while this problem gets resolved?
Using the Kemper Rack for 3+ years now.
Try to update via USB!
-
I can edit whatever I want. Not sure what you mean with "you cannot edit it directly". Please be more specific.
-
... As far as I can see there is no way to adjust the Stomps, Amp, Cab etc of a performance without loading it into the kemper and tweaking it from there ...
I am not saying that Rig Manager is great piece of sw but your statement is completely wrong! You can CAN "adjust the Stomps, Amp, Cab etc of a performance"
-
Try it via USB.
-
.....Nothing stipulated in the manual, unless I missed it.....
You have mentioned "manual". Which one is it? If the one that comes with the Kemper than rather download Main Manual 8.5 This one is very detaild and you will find answers to most of your questions there.
-
Read Main Manual 8.5, page 89, chapter "Running a Guitar Speaker Cabinet from a Power Amplifier, “Monitor Cab Off”.
-
Could you disclose more details? How do you update? USB/Rig Manager? From which OS version? etc.
-
I think you missed my point ...... You suggested him to "Install latest one 1st which is 8.7.10" , but if he had a lower OS
he had to install 7.3.2 first to be able to install "newest OS" and then his KPA got issues ......
Did you read the attachment ? There's nothing wrong with upgrades in two steps ....
And to answer OP question : No that is not normal
Cheers !
My comment was not meant as detail instruction how to upgrade from particular old version to the latest one. These instructions are available directly on the download page:
To upgrade PROFILER Head™, PROFILER PowerHead™, PROFILER Rack™, and PROFILER PowerRack™ via USB memory stick from OS versions before OS 7.3, OS 7.3.2 needs to be installed first! Older versions than OS 7.3 on these models don't recognize this new integrated OS revision. For this purpose OS 7.3.2 can be found on the Download Page at Older Software Versions:
https://www.kemper-amps.com/do…8/Older-Software-VersionsSo I do expect that people who wants to upgrade can read and actually do read these instructions!
I think I said everything I could. My only intention was to help solve the problem and if it was confusing for somebody - than I am sorry. But from my prspective I do not see anything wrong on my original comment!
PS: I feel you are a bit carping
-
"Very old" .... Ha ! I'm still on OS 6 and very satisfied whit that. Steady as a rock, no problems what so ever
And if OP Alberto was in the same OS or lower he had to update in two steps to get to "latest one" 8.7.10
Yes, but you don't have problems as alberto cohen has!!! That's a big diffrrence. I personally do not see any problem to upgade in 2 steps! What's wrong with it? I don't get it
-
The link is OK, you have to select what you want i.e. Main Manual and than download it. This is how this web is set up! And NO (!) there is MUCH more in the manual than in video tutorials for sure! You must only be willing to read.
-
7.3.2 is very old version! Install latest one 1st which is 8.7.10 and then try if it is OK. Also download and read Main Manual 8.5 might be quite usefull!