Posts by charlphi

I already asked this feature few years ago.

Like the polymode of a boss oc3?

I have "stereo" in but mono out, so mimiq, stereo widener or double tracker won't help on output.

Same in Belgium.

Lots of heads and racks in second hand.

I suppose some people prefer playing gear instead of guitar.

Instead of mimiq, do you think it would be possible to "widen" the sound with some kind of delay between the to signals?

By adding a delay in slot B (with parallel path) or with a pedal with a very short delay in one the two inputs?

You give me an idea. Instead of using a expression pedal (which takes place and can move during a show), I could use a pot wired to a stereo jack.

I'm not very familiar with expression pedal and morphing. Can you asing two expression pedals to two eq frequency in same eq slot?

Thanks for the quick answer.

I also have feedback issues with my Godin Multiac guitars. I use 3 guitars: a nylon, a steel and a baritone.

I set a para eq in slot X but it's not easy to set up especially when you have just few minutes for your check.

It's not easy to find the right frequency, sometimes you have several. They are different with according to the guitare. It would be great to have something like a notch effect in input section.

I play a lot solo to accompany a singer. My main guitar is a Godin Multiac HG Steel with dual output: one for acoustic and the other for magnetic pickup.

I have a good sound by using parallel path:

• Slot AB for alternate input (effect loop) with acoustic signal
• The rest for magnetic pickup with stack and effects.

As I'm the only instrument I was wondering if using TC Electronic Mimiq doubler before the kemper inputs could add something like thickness to the sound, a bigger sound?

I though to plug

• Guitar piezo to mimiq L input
• Guitar magnetic to mimiq R input
• Mimiq L ouput to alternate kemper input
• Mimiq R output to kemper main input
  

Kemper output is set to mono because of live use.

Quote from V8guitar

Moog EP3 for volume and Whammy, Cry baby modified into an expression for wah ( so uses the KPA wah but looks the same as a cry baby)..

Same for me. I removed the wha circuit and and put a stereo jack.

I still use the boss in a loop. The only pedal I use.

I never succeeded with eq, octaver.

I really need this feature too.

I have the same problem with my kids. But I would avoid the dog solution 😅

The only eq that I use are high and low cut on output menu.

Oups, j'ai parlé trop vite.

Et peut être regarder le clean sense dans la section input?

Désolé, mais je ne comprends même pas ton problème. Ton message n'est pas clair. Et pour cette partie du forum, il faut parler anglais.

Comme suggéré dans le précédent message, je te suggère de parcourir le manuel et surtout de regarder les quelques vidéos youtube de chez kemper.

Il faut un certain temps pour arriver à maîtriser l'objet mais une fois la phase d'apprentissage passée, tout devient limpide.

I put a feature request years ago.

I never found better than my boss oc3.

I tried parallel path with eq but never able to really cut high string.

I would like same device, but smaller. Only midi without switch would be enough.

It's personal taste. Since I have my kemper I only play with headphones or iem. I can't hear anymore the sound of a cab and I don't like playing loud.

If a want to travel in my house with a quick start device, I play acoustic

Maybe this kind of switch? Lehle [email protected]

You can plug your different guitars and control the switch via midi from the kemper.