Running the KPA to two cabs

fizzoftheburn · Mar 27th 2014

I know that the monitor output (signal with the cab) is mono. But would you send the mono signal out to a stereo tube power amp and then on to two mono 4x12's.

Is it as simple a 1/4" Y cable out of the KPA. Or is the solution to run the mono signal into a A/B/Y box to the stereo ins of my power amp.

Or maybe there are other options I'm unaware of.

Sent from my iPhone using Tapatalk

viabcroce · Mar 27th 2014

Both solutions should work. You can also use the Stereo Main Out

Kempermaniac · Mar 27th 2014

AFAIK you can go stereo with monitor and direct output. Right?

alex_it · Mar 27th 2014

Quote from Kempermaniac

AFAIK you can go stereo with monitor and direct output. Right?

Yes, the only drawback is that you can't set one common output equalization(only for the monitor out)

Ingolf · Mar 27th 2014

Plus you can't switch off the cab on the direct out, only on monitor out.

viabcroce · Mar 27th 2014

These

Share