output volume help required

    hi fella's,


    i'm baffled by totally different output volumes, xlr balanced output is way too hot.(totally unusable at the moment)


    please listen to the small sound wav below.......


    first clip is main output (guitar cable) ... second clip is monitor output (guitar cable).. third clip is balanced output (xlr)


    all output levels set to -20db, master volume 70percent, volume at 9 o'clock ( all cables tested ) and all inputs into logic set identically


    the strangest thing is that if I adjust the master volume down by any amount.. all outputs automatically sets to zero and I have no volume at all.


    https://dl.dropboxusercontent.…81337/output%20volume.mp3


    video of master volume problem .. http://www.youtube.com/watch?v=0Im-WDmPO9A


    I am totally stuck guy's any advice welcome thanks ?(

    Edited 2 times, last by plek ().

    1/4" outputs are +16 dBu at 0 dBFS (Kemper max/clip), and the XLR outputs are +22 dBu.


    The levels are what they are (quite normal) and you need to take them into consideration when adjusting destination input (and/or Kemper output) ;) Remember to set your interface inputs at +4 dBu reference.

    Edited once, last by Trazan ().

    Quote from Trazan

    1/4" outputs are +16 dBu at 0 dBFS (Kemper max/clip), and the XLR outputs are +22 dBu.


    The levels are what they are (quite normal) and you need to take them into consideration when adjusting destination input (and/or Kemper output) ;) Remember to set your interface inputs at +4 dBu reference.


    thanks,


    but to my ears there is much more than a +6dbu difference !!!!