you can use any line output on the Profiler for recording-just make sure that you set the output source to master mono in the output menu for the output that you use. A line-level signal does not require a speaker cable. Any standard TS cable will work. Make sure to set the input on your interface to line level and not Hi-Z.
thank you!
It's in the name ... "Speaker cable" goes to speaker .....
Cheers !
Okay, so then do I use direct output or monitor output if I am going into the Apollo solo line., given I will be using an instrument cable.
the Profiler sends a line-level signal. Do not use the guitar input but one of the line-level inputs. If you want to record the Profiler in stereo and record a vocal signal at the same time you need an interface with 3 inputs-2 line inputs for the stereo signal and a mic input for the vocal.
if I am going mono, do I use the direct output or monitor output into the solo, and also do I use a speaker cable or instrument cable
Do I use an instrument cable or speaker cable for direct output or monitor output into Apollo solo line input, labeled as mic/line 1L
(I am not talking about the front guitar port from the Apollo solo).
Was gifted a vboutiqueusa vumble 1x12 with a G12-65 loaded into it, to go along with my Milkman The Amp 100. Can I plug my Kemper Powerhead into it?
What is the best option if I already am using a line/mic input, for a microphone? I have done two outputs into both lines but when I am recording with vocals (live) I don’t want the sound unbalanced or restricted to one side. Should I go direct output to the guitar line on the front of the apollo solo with a 1/4 instrument cable?
Thank you everyone for the help.
Well….the Kone is about as good as anything. All you’ll get with something else is ‘different’, not necessarily better.
You’d need to wire a jack directly to the speaker and bypass the combo amp section completely. Basically, look at the wires coming off the speaker. You need two like that going to a 1/4” jack.A handful of parts and 15 minutes with a soldering iron and a few basic wiring skills.
what about wattages in the speaker? Still confused about that, even with how the kabinet
Then….why would you need another solution? Just curious.
I want to plug into a good cabinet instead of a Kabinet or different frfr. Just curious if I could get away with plugging the head into a good combo amp, this way I wouldn’t have to buy another speaker. I have a milkman the amp combo but am not sure the correct procedure of unplugging the head and plugging the kemper into the speaker.
Well, if you got a Kemper Kabinet you could experiment with different cab sounds by using the imprints. This gives you over a dozen options compared to the single cab option.
I do not have a Kemper Kabinet and am not looking for one.
So I have used a kemper head for a few months now but constantly plug it into the speaker system at the frat house. Now that I am home I want to invest in a nice cabinet solution. I am also interested in plugging into a milkman "the amp" combo units speaker. I am most confused about the speaker wattages and what speakers/cabinets I can plug into before the 600w powerhead blows it out. I am not too interested in an frfr unit right now so it would be helpful if we just stayed on normal cabinets/speakers from combo units. If anyone has any experience with a similar situation any help would be appreciated. Thanks.
