Thank you
Posts by GLParrishmn
-
-
I understand you need to use NRPN but the page address is (0x04) which is #CC 4 which is used for the pedal.
I'm using a MIDI Captain to change to different rigs which gives me more flexibility.
I would like to use one rig yet set up the MC to change the Transpose function in the rig module.
The documentation is not clear. What is the actual process or sequence of commands.
#CC 32 BANK SELECT Val 0-4
#PC xxx program (0-127)
# CC (?) To select the Transpose Function Val (?) to select the range
The MC allowes me to send up to 12 commands per button.
-
I would like to control the transpose function by MIDI using a MIDI controller.
I’ve looked through the Manuel and midi documentation but it only mentions #CC 4 which is for the pitch pedal.
I would rather use the transpose function in the Rig module.
Thanks GPmn
-
No need to use a DI box to FOH
that's what XLR outs are for.
1/4 are used to send to your monitors.
-
yes you can lock any effect
-
My stage and the Case come in under the 50lb weight limit
-
you mentioned you live in a complex.
Did you take you rig to another location and test it.
If the noise is gone, the electric powering you complex is dirty somewhere on the line.
Could be another building which is on the same grid.
Worked a club and they had dirty power nothing could be done about it.
-
I usa a MIDI captain 10 switch
It's easy to program
-
the SKB and the Kemper weight in under the 50lb weight limit.
Flown many a gig with never a problem
Plus you can lock with a TSA lock.
-
I use this you can check it or carry-on
SKB 3i-2015-7KPS iSeries Kemper Profiler Stage Case
-
good reason to have a separate page for the player
Will cut down on the confusion
Plus what is revelent to one is not to the other
-
-
You must be the original author of the rig, amp, cabinet and profile, in other words, please do not upload other people's work.You must be the original author of the rig, amp, cabinet and profile, in other words, please do not upload other people's work.
-
ok when I get home
-
I have a copy. Don’t know if I can post it but DM
-
Un-Link Main out from the Master Volume
Set Main Volume to 0db turn on the -12Pad
I use Rig volume to match Rigs
-
ok but what are you trying achive with Sysex
-
I've worked with NRPN.
What are you trying to achieve.
-
there is if you are using a MIDI controller
-
before any updates