Thanks guys
Posts by viabcroce
-
-
.... Vuoi nuovi amp?!?!?!
... LEGATELO!!!!!!!!!!!!!!!!!!
:D :D :D :D :D :D :D :D :D
-
-
-
Hey Joao
-
I seem to perceive a somehow negative feeling regarding the M-Audio in this thread
-
To the OP:
Of course a higher sound level emphatizes the lows and the highs.
To exclude the too many variables, you should test your patches\gear at different volumes in the same room and in the same positions.
The FR of a digital device is much broader than classic guitar amps\cabs, and in some rooms you might discover resonances which were not perceivable before. The placement of the cab itself in the room can change the sound a lot. Sometimes it's enough to raise it from the floor, to take it far from walls and/or corners, or to not put it on a wooden, cave, resonating floor\piece of furniture\stage.
HTH -
You'll have to join a list, as the site says. But it might end up being your best purchase along with the KPA...
If you want to know more, TGP and the Fractal forums have lots of fhreads about them.
-
Hey Bluesboy, youtube for "Kemper orientation film" n. 2 and n. 3
-
Good work Michael
-
-
Hey Lasse, late to the show but wanted to chime in to welcome you
-
Ciao Rick
-
I'm 50. Learned my first song from a friend @ 14
-
-
Hello Monkey, welcome here
-
You don't need dual input to run the cab in parallel mode, just the internal wiring.
Uh... i thought the Camplifire was stereo-not bridgeable?
-
As long as you let your KPA output the same signal from both channels, the two 2x12 will receive... the same signal LOL. Of course you give up the stereo sound
-
@ PBGas: you don't have to run a stereo signal in the rewired cab: you can just feed it with a dual mono signal as if it was a mono cab, so you'll have no issues with phase cancellations, exactly as if it were working mono. HTH.
-
I'm a woman, i have the KPA and play in a death metal band in Australia (just starting to put some shit together).
I also work as a live sound engineer.Now this is fully enjoyable! Welcome NIL!