Posts by rm12
-
-
I have never seen a balanced spdif cable.
If they say it's an spdif cable, you can use it.
If you want a higher quality use thicker cable with neutrik chinch. -
have you tried to plug off all cables, wait 15 min. and try again?
-
Wow, cool sound and playing.
Wich profile is it? -
Cool, looks nice.
Thanks a lot.
-
Search for dr z. They are in rig exchange.
-
check the output settings.
You can enable and disable fx, amps a.s.o. for the output. -
What files did you delete? Did you delete other than rigs?
-
I would try 1.8. what about the sound if you plug a headphone in the kpa?
Have you tried a system reset ( after backup)? -
Wich firmware version do you use?
Have you tried the 1.8 beta? -
+1
That would be nice -
I miss the link?
-
Wow, perfect sound and playing.
-
Go to the download section and load the rig packs.
Or restore factory rigs in your kemper system menu. -
There was a bug in one of the betas. You should update to the latest firmware version.
. -
There was (is) a known bug since 1.51
Quote
---------------------------
- Upgrading to 1.5.1 with much more than 1000 rigs and presets might generate a memory problem. In this case please bring down the number of rigs and presets to about 1000 before you upgrade.
- Downgrade to some older Firmware (e. g. 1.1.0 Release and 1.1.1 Public Beta)
will cause a hang, which can be overcome by a reset of global settings (push and hold the SYSTEM button, while starting the unit). If you need to recover your global settings, please create a backup before you downgrade and restore afterwards.
- After scrolling through MIDI PrgChg#s on page 5/8 of the System menu and selecting another PC# without assigning it, no PC# will get displayed on the main screen. However the original PC# is still functional.
- When changing filter or sort criteria the Midi PC# of the actual rig disappears from the display, but the PC # is still functional.
-------------------–-------------Maybe this is your problem?
-
-
That's just the connector for the upcoming controller....I dont't think so. Connect the rj 45 port and test it with your browser.
The kemper has an built in webserver.
Try it. -
Did you set you device to 44 KHZ? The Kemper must be the Master.
-
It is for secure. Many websites have a limit.