Posts by Giblp59

Yes! Thanks a lot. Now everything is fine.

Main Output is "Master Stereo", which is correct. Also with Headphones (Front Jack) the same Issue.
Anyone tried the Panorama-Function in 4.06? Where can I get an older OS to check?

Sorry, it runs 4.06.

Hey Folks,
does Your Panorama Funktion work in 4.06? I normally use E-Guitar Presets on Left Side and Acoustics panned to the right Side with the Panorama in Rig-Menu. But Now it is not working any more. Is this a software Bug which is in the Update? Panned to right completely (5.0) I get also a low signal on the left side (which should be the Acoustic Channel or the Mixer). Pannend to the Right side, I get almost the same level on the left side.
Any Ideas?

OK, then it's not a bug....
Thank You DamianGreda!

Yes, as i said: This makes sense. But look at Main Outs. Isn't it logically that an Effect is ON when Box is CHECKED?
Do you have the same?

OK, again:

Box is checked - No Headphone Space on Main Outs
Bos is Unchecked- Headphone SPace on Main Outs is ON

On Headphone Out (Front Of Kemper) the Effect is always on.

On Headphone Out, the On/Off Switch (Output Section) does not affect the Signal. OK, that makes sense

BUT: For Main Out, The Room/Space-Effect is active, when it's switched off and vice versa.
Only my Profiler or known issue?

By the way: How much Headroom space do you use (mine is at 1,8)

I miss the great Headphone Space-Option at Monitor Out!
It's a great Feature, but live I send Mains to FOH und Monitor Out to my Fischer In Ear Amp. This way I am able to control my Monitor Volume via Pedal by myself (what does not affect FOH Signal).
I know some People, who does it the same way.
But I'd like to have the Headphone Space-Option an Monitor Out instead of Main Out (and al other Stereo Outs).
Headphone Out to In Ear-Amp is noat an Option, because I want control my Kemper Volume in my In Ears by Pedal.
I know, it's possible to send Monitor to FOH and Main Out to my Fischer In Ear Amp, but I need a Stereo-Signal send to FOH (Acoustic Guitar left, Electric Right via Panorama).
Someone heard of Plans for the Future?

I tried it and IT WORKED.

No, there is a misunderstanding. I don't want to load two Profiles at the same time. I will switch between a Profile for AcGit which is routed to the left Output and then use the ElecGit with all other Profiles which are routed to the right Output.

A/B Switch is not an Option. I have the Remote and am so satisfied with only ONE Guitar Cable (direct into Kemper Front Input). I guess, my idea is really the the best way to go. I'll try tonight.

For Acoustic Guitar I have one Profile with bypassed Stack-Section for pure Sound.
I think it might be better to have Electric guitar-Profiles on one side (Main Out Left) and Acoustic Guita-Profiles on the other side (Main Out Right) via Panorama to give the FOH two different Signals. Anyone who has done it live or any other suggestions?

Thank You!