Thanks! Problem solved finally!
Took my old midisport uno and checked out the incoming information and finaly got the messages after all the upgrades to everything ??
Restarted and upgraded everything and after the eve of tweaking everything works and sounds great!
Thanks DamienGreda also fir the tips. ?
Yep. If its set to something else nothing goes in.
Display MoreConnect all like this:
KPA MIDI IN to FCB MIDI OUT
KPA MIDI OUT to FCB MIDI IN
KPA MIDI THRU to LINE 6 MIDI IN
Read manual how to set PC changes in performance slots and set KPA external device port to MIDI thru.
It still dos not work in this configuration?
Does FCB works now connected with KPA only?
Yep, it was connected like this. This is the configuration the problems appear.
When connevted like this the KPA works like it should but Line6 does strange things, isn't this some voodoo stuff? ? God I hate midi ?
I also read the manual and tried the "3rd party midi devices" thing on system menu on Performance mode but nothing ?
I tried ?
The weird thing is when the Uno4kemper is connected as it should like you mentioned and like I first tried it doesnt give you the normal commands, including Pc commands. It then truns like this:
The upper row does not do anything and down rows first two recalls the two presets everytime and third one just puts the EXP pedal on on the HX. ? And the Exp does nothing on the hx as does not the two down row buttons and bank change buttons. I was so confused and had been stuck here for a couple of days googling and looking on manuals ?
Thanks for trying with me ! ?
Yep, midi trough is turned on. ?
And I first tried to connect it like that but it did something totaly weird. It did not receive the right messages at all in the HX. Somehow the KPA changed the the midi-info to complete different so I had to try this and it was the only way to get the right info to Line6. ?
Hello guys! And thanks already ?
So basically as only guitarist I bought a second amp to beef up and make my sound stereo and have a problem with controlling the both.
My simple setup:
Guitar -> Mimiq Stereo split -> Kemper (Main) and second the Line6 HX Stomp.
I am using Behringer fcb1010 with uno4kemper chip and everything has worked great with the Kemper so far. So I tried to connect the Line6 also for the same thing and something weird happened. The presets change as normal in Kemper and in Line6 but the upper rows "stomp" LEDs and tap tempo stopped working ?
So the Kemper revecieves the messages and but the Leds, and tap tempo just stopped working all together.
Cables goes like this
Fcb Midi Out -> line6 -> line6 midi trough -> kpa midi in
kpa midi out -> fcb midi in.
Any help? ? Or any ideas? Or anything? Should I buy a midi doubler or something? ?
No. I'm using different performances in a one song. Would be impossible for me to go and save it in between song
I am sorry but never founded a answer for this. And thanks for the help.
After updating to newest firmware I lost a very good action from my Kemper. I use fcb1010 uno for kemper on a Performance Mode always and 1-5 buttons (lower ones) are for rigs and upper 6-9 are for stomps/effects. Before updating when ever I put for example a chorus pedal for different slot/rig and press to another performance rig (2 to for example 1) and go back to that rig chorus stomp pedal was Still ON. IT was essential for my live performance so is there a way to like not always recalling the saved rig without any additional changes and that Kemper would like save the stomps for the time I shut it down like it use to?
For me this was a unpleasant update!
