Success! Thank you ckemper!!! The system init, by holding the System button during bootup, fixed it. Now I get a beautiful signal out of my Monitor Output. So very much appreciated, all of you, for your help with this.
Posts by cliffstevens
-
-
Thank you HELL-G, Ingolf and Gizmo for your incisive responses!
- The device I am connecting to is the "Input" jack of my Marshall MG15MSII head Clean channel. From the Kemper "Monitor Output" jack, into this Input jack, I am connecting a standard 1/4" guitar/patch cable. When I do, there is NO sound/signal. When I connect my guitar directly to this Marshall Input jack, using this 1/4" cable, I get sound/signal. When I connect my guitar directly to my Focusrite interface, using this 1/4" cable, I get sound/signal. When I connect my Kemper "Monitor Output" to my Focusrite interface, using this 1/4" cable, I get NO sound/signal. The Monitor Volume, on page 2 of the Master/Output screens, is set to -0.0dB (turned all the way up/clockwise). The Main Volume on page 2 of the Master/Output screens is set to -10.6dB, or a little more than halfway right/clockwise, and there are checked checkboxes on this page for Main Out Link, Monitor Out Link and Headphone Link.I feel like I am missing something really basic somewhere, but at the same time, running out of troubleshooting options. Though I'd prefer not to, a System Reset is seeming more likely: How to reset your Kemper to factory defaults (I solved all my problems) PLEASE READ IF YOU ARE HAVING ISSUES
Remaining ideas?
Thank you all again in advance!
Cliff
-
Thank you for responding HELL-G. My Monitor Output was/is set to Master Mono
If it matters, on that same screen, my Main Output=Master Stereo, Direct Output=Master Mono, SPDIF Output=Master Stereo.
Can you think of anything else I should try?
Much appreciated, Cliff -
Hi folks, me and my new Kemper have only been together for about a week now, and though I'm deeply enamored, I cannot get any sound out of the Monitor Output jack and I'm hoping someone here can help lead me through some troubleshooting routines. I have no problem listening through the Headphone jack nor do I have any trouble hearing everything when connected to my Mac/Focusrite interface via XLR left/right Main Output. I've been finagling with the Monitor Out Link on/off setting and it's associated volume setting in the Master/Output screens but still can't get any sound out of the Monitor Ouput. I have no trouble when using the Direct Output/Send jack. Could it be that my Monitor Output jack is just physically dead? I am betting it's just me not catching a silly setting somewhere instead. Any advice on figuring this out? Thanks so much in advance! I LOVE my Kemper!!! Cheers, Cliff in Philly