Rig Manager 1.6.3 seems to work. I'll stay on this version until the new one gets fixed!
Posts by FelixGerlach
-
-
Hey there,
there's a problem synchronizing the Kemper after updating to OS 5.1.1. Everytime I change something in the Rig Manager (for example the name of a rig), the loading screen appears on the panel of the Kemper but staying at 0%. It doesn't change after minutes - I always have to reboot.
Anybody made the same experience?
Thanks!!
-
If I do so it's dead, at least if I turn the "mix" up to 100%. I begin to think the send is broken. The return seems to react on the things I press on the pedalboard, and the tuner located at the first position on the board actually doesn't get any signal in!
-
The loop level is set to 0dB, the mix is 100%.
-
Help needed!
I recently tried to plug my pedalboard in the fx loop of the kemper. I chose the stereo signal return (return + alternative input) to use my h9 and blue sky as a stereo pedal. Unfortunately I couldn't figure out why there is no sound at all.
Actually I hear noise when I press the compressor or an OD in my pedalboard, furthermore I hear the typical plug noise when I plug the cable in and out. So the return of the kemper obviously does work.
I used to Stereo Loop in the X Slot. If I turn down the Mix-Knob I hear the guitar sounding, but of course only the direct signal. So the cables work as well.Is my kemper unit broken somehow? Any suggestions I haven't tried yet? Maybe there's a global setting I missed?
Thanks so much, folks!