Hi,
only today:
50% off (!!!) on every single cab purchases:
https://www.celestionplus.com/…end-offers-celestionplus/
Greez
Marc
Hi,
only today:
50% off (!!!) on every single cab purchases:
https://www.celestionplus.com/…end-offers-celestionplus/
Greez
Marc
Hi, my 2 cents …
Pull the trigger
As always I would advise to do some DI Profiles of your amp and play those profiles over your normal guitar cab. This method will show you, that the Kemper can sound exactly like your amp (most of the time). The change to frfr (the so called change of paradigm) should always be the second step, if your not used to it.
For the the direct FOH-Sound you can choose out of thousand cabs which are circulating here.
Greez
Marc
Ganz ehrlich, ich verstehe die ganzen „Klingt super“ Aussagen bei Endstufen dieser Art nicht. Die sollen doch nicht klingen, sonder möglichst neutral sein?! Und eben laut machen?! Oder verstehe ich da etwas falsch? Gibt es da wirklich solche Unterschiede?
great Profiles, thanks alot. The first profiles from someone else, that suits my taste;) !!!
Ok, du meinst also tatsächlich Stereo
Das funktioniert natürlich nicht mit dem Cab-Merger. Der wirft ja das komplette Signal auf alles.
Dann müsstest du tatsächlich ne zusätzliche Endstufe anschaffen, um die Box anzusteuern. Dann könntest du das trockene Signal auf den Speaker Out werfen und das Wet-Signal auf einen anderen Ausgang. Sollte funktionieren.
Aber ohne eine weitere Verstärkung, sprich eine Endstufe, definitiv nicht.
Grüße
Marc
N‘abend,
um es kurz zu machen, ohne eine weitere Endstufe kannst du eine weitere passive Box nicht an einen anderen Ausgang hängen. Da kommt nix an, weil unverstärkt. Aber was meinst Du genau mit Stereo? Wenn Du einfach 2 Boxen dranhängen willst, also 2 von den 2x12ern, dann kannst Du Dir – ebenfalls von Palmer – das Ding hier zulegen:
https://www.thomann.de/de/palmer_cab_m_merger.htm
Da schließt du beide 2x12er an, gehts mit mit einem Kabel in den Speaker Output und voila, beide Boxen werden angesteuert.
Das ist dann eben nicht stereo, sondern Mono. Aber ich vermute, das ist genau das, was Du mit Stereo meinst, oder?
Grüße
Marc
You are welcome
just go to the output menu and activate «Monitor Cab Off» … Done
Hi I‘m selling one of my Kempers … Its a black Powerhead, located in Germany. I‘m the first owner and it is about 1,5 years old. Good condition, everything is fine with the unit. Shipping across Europe is no problem. No Paypal. 1.850 Euro, shipping within Germany is included.
Greez Marc
Today I made about 10 Direct-Profiles of an amp and every third profile was damaged The damaged profile was like having a fuzz placed before the amp?! Really fuzzy and override.
When i do it again, the profile is ok?? I have changed nothing. I opened already a support ticket, but perhaps somebody had a problem like this before?!
Greez
Marc
I‘m selling my Friedman BE100 in mint condition. First production series, SN 0155 with two input jacks. The real handwired one. With footswitch and original shipping box. It's the same model like in the Phil X video:
Located in Germany, Saarbrücken.
Shipping within europe is no Problem. Collection preferred.
Like new, without tinkering, new tubes from Januar 2017.
German:
Biete hier meinen fast neuwertigen Friedman BE 100 aus der ersten Produuktions-Serie mit niedriger SN Nummer, nr 0155. Be und HBe sind über die zwei inputjacks auswählbar. Alles noch wirklich Handwired. Inkl footswitch und orginal Verpackung. Es handelt sich um genau dieses Modell, vorgestellt von phil x (siehe oben)
Unverbastelt, super Zustand, wie neu!
Röhren von Januar 2017!
Versand und Abholung kein Thema.
Lautes Antesten ebenso.
Splawn Nitro Head – EL34 – with loop level control and footswitch in perfect condition. Shipping across europe possible. 1500 Euro.
Ah, verstehe
Ich weiß nicht ob ich Dich korrekt verstehe. Aber du kannst mit Morphing alle Sachen auf einmal einblenden Ohne Steptanz.
Delay, Riglautstärke, Tubescreamer … Alles auf einmal, auf einen Klick?! Dazu brauchst du nicht zwingend ein Expression Pedal.
ah ok, sorry, überlesen
Sollte er nicht darauf achten, an den Speaker Output nicht eine weitere Endstufe zu hängen?
Ich denke, wenn die Fryette Power Station angeschlossen werden soll, dann auf jeden Fall nicht an den Speaker Output sondern an den Main Out … Oder seh ich da was falsch?
Wenn du „nur“ auf einen Solo-Sound schalten willst, wäre ein einfacher Schalter sogar besser. Am besten Du liest das Handbuch Das scheinst du noch nicht gemacht haben. Da kommst Du nicht drum rum.
Ja, Du könntest mit Morphing alles zusammen ein- und ausblenden. Dann hättest du den Grundsound für Rhythmus und mit einen Tritt den Solosound inkl. Kompressor, Boost und Delay.
sudden volume drop is a bug … I wrote the support and they confirmed that it is a bug. They didn't know before
It also appears on 4.2.2. …
They are working on it. For me works a fix: Turn up power amp boost in output menu and turn it down again.
Then my volume-level is normal.
Greez
Marc
I have send a ticket and a backup File. The Support answered very quick:
They can reproduce my volume drop as well … Its a Bug and they will work on it for the next version.
A downgrade to 4.2.2 wouldn't help, same behavior.
Thanks all for trying to help and sorry to @almesy for abusing his thread
But perhaps my bug is a part of your SUDDEN drop too.
greez
Marc