Hello, all!
I know this isn't exactly Kemper related, but I really would like some help understanding an issue I'm currently having.
Recently, I installed a set of Suhr SSH+, ML, and SSV pickups in an HSH guitar (5-way switch) and I noticed that positions 2 and 4 sound a bit out of phase.
I don't have an image, but here's a basis of the wiring for the pickups:
Humbuckers (SSH+ - bridge and SSV - neck):
Black and bare wire were soldered to ground, red and white were soldered to a mini toggle switch for coil split, and the green wire was soldered to the 5-way pickup selector switch.
Single Coil (ML):
Black wire was soldered to ground, and white wire was soldered to pickup selector switch.
I have 2 speculations of the issue:
1. Both humbuckers are wired out of phase, causing positions 2 and 4 to sound out of phase (nasally).
2. The single coil is wired out of phase, causing positions 2 and 4 to sound out of phase (nasally).
Does anyone here know what could be the culprit and how to remedy this? Any help would be appreciated!