Roland EV5 is one of the cheapest I have found. Behringer also makes a cheap expression pedal.
Just saw this one: Nektar NX-P Universal Expression Pedal
Roland EV5 is one of the cheapest I have found. Behringer also makes a cheap expression pedal.
Just saw this one: Nektar NX-P Universal Expression Pedal
Naming any commercial profiles in this section will get your post moved. So, search the RE using keywords "delux" "deluxe" "lux" and "dlx". You may need to narrow the search further by searching in Name field. Sort by gain. Audition profiles until you find the sound you are looking for, or as close as you can find.
Then, try tweaking using Definition (likely turn down slightly), Tube Sagging (likely turn up to 7 or more), and the Amp eq (likely mid and treble down, then make up the top end by turning the presence up. If necessary, use the Pure Boost in front of the Stack for a full range push. ?
And please, report back and share your findings.
Just listened to the track again. For the above, I was thinking of the heavier sound that starts right after the intro
For the more jangly sound, also search the RE for deluxe, and when you find the one, add some direct mix in the amp section, and a short, bright reverb.
Roland EV5 is one of the cheapest I have found. Behringer also makes a cheap expression pedal.
Yeah, I leave myself little reminders wherever I can.
Sound really good.
Laughed at "Cenozoic Era"
Thank you for the freebies.
Somewhere in Tim Pierce's videos he has one where he addresses all of the touch, technique, etc. for this type of tone. And he plays / uses La Grange as an example.
I just looked quickly and couldn't find it. But spending time looking through his videos will not be a waste of your time.
they sound great thank you for sharing
If I am understanding the discussion of volume compensation/leveling, it appears that overdrives into distorting profiles will yield more distortion and very little or no volume increase as the overdrive volume is increased above 0.
This also appears to be the case when using the Pure Booster. And, for my use, that is AWESOME!
Thank you so much!
Regarding the Kemper not behaving like an amp when turning your guitar volume down: It is possible this is due to the guitar. The type of pickups, the type of pots, any treble bleed network, and possibly other factors, will affect that.
Also, this is a great thread. Thank you to all that have contributed.
+1 for expression pedal
Shortcutting the MIDI OUT with the MIDI IN of the same device is not a good idea.
Thank you.
I have the same difficulty. Can somewhat be overcome by opening additional windows.
Related to the other thread discussing potential second morphing:
Using the Remote, could the Kemper send a MIDI signal to itself? For instance, could an expression pedal be assigned to send on channel 7, which I think is the control for delay volume, to control delay volume? And if not, is there some kind of MIDI hardware that would allow this?
I have an extremely limited knowledge about the use of MIDI, so please correct me if I have used the wrong terminology.
You don't have to assign a global switch to Rotary Speed if you rarely need that function. The first choice are the Effect Buttons I-IIII anyhow, which are Rig-specific.
But you do have to use one button to turn the Rotary effect on and off and another switch to change speed, or toggle between two Rotary effects (one set to fast and one set to slow).
3. Bedroom volume tone does not equal live tone. I have rigs that sound awful quiet but amazing cranked.
Agreed. And, I have had the opposite happen also: rigs that sounded great in my headphones, FRFR, and ear monitors had way too much top and/or bottom when cranked through a PA.
Another consideration for new users: I have come around from the school of ,"if the rig isn't quite right, find a rig that is" to " if the rig is close, then tweak it to what I want".
I think two factors lead me to that change:
I realized that profiles that someone else could make sound amazing, did not sound as great with my rig, me playing, etc., etc. And believe me, I really really tried.
And, I've finally worked enough with the Kemper to grasp what most of the setting do and realized I knew how to manipulate things to my liking.
This whole discussion is making me apprehensive. What seemed like a request for either a second morph or control of individual parameters now has me worried that the Kemper is fixing to become nigh unusable.
A zero volume setting on the Green Scream is not necessarily unity because the volume of the pedal is also affected by the drive and mix settings.
There has been a recent update that does something about volume leveling, but in all of my reading here, I can't understand what it really does. Maybe someone who does understand will contribute here, and maybe that new function will help with getting things at unity (??).
Can't wait to check it out.
thank you
Check all of your global settings (input, output, rig, etc) and see if the update changed anything. And remember that Performance Mode and Browse Mode have different settings.
I found that the update changed virtually everything in mine, but when I reset to my former values/settings, all was good.
When I am onstage, I have one expression pedal to control volume after the stack and before the delays and reverbs, like a master volume. I have one expression pedal to control the delay volumes, using Morph. I use two delays and use a button on the Remote to toggle between the two.
Scenario 1 -- I would like to control the delay volume independently with an expression pedal and also be able to use Morph (either with a button, or ideally, with a 3rd expression pedal) to engage the Pure Booster, located before the Stack, and simultaneously bring the amp volume down the the level it was prior to engaging the Pure Booster.
Senario 2 -- In another slot, I would like to use Morph to vary the mix level, volume, and tone of a Distortion while maintaining independent expression pedal control of delay level.
Stated another way; I want to be able to control delay level, with an expression pedal, and also be able to use Morph. And yes, absolutely, I am trying to use one performance slot for similar/related sounds instead to changing to a different slot or performance.