The labels for the center frequency were wrong; what you hear didn't and will not change. One of the next updates will consolidate those aspects on both platforms and it will look identical.
Okay, Mr. G String, thank you for your clarification. In addition, it also needs to be corrected in the manual section
I can help you convey some questions, but I am currently unable to log in to YouTube. Can you tell me what problem you have encountered?
When I imported the same RIG into KPA and KPP separately, I found that they had different parameter definitions in the Graphic Equalizer section, which forced me to adjust them one by one.
I uploaded two diagrams, to be honest, I don't understand what kind of considerations the technical personnel are based on, which has caused trouble and negative feelings for my rig file management
Maybe submit a support ticket?
Due to network policies, I am unable to obtain the verification code for supporting tickets here. I will do my best to try again later
I think it is an incomprehensible setting to not be able to hear the accompaniment in real-time through the headphone jack during recording of works
When I connect an iPad to the player's USB-B interface for recording, the iPhone connected to the Player via Bluetooth cannot play accompaniment music at the same time. It will automatically stop playing accompaniment until I turn off the recording function of the iPad.
I remember there was no such issue with firmware version 10.9.2
Has anyone noticed the same situation? 
what stand are you using for the Player? i just 3D printed one.
This is also 3D printed, with poor quality and rough workmanship. There are very exquisite wooden brackets on the market, but they are not cheap
Is that a battery? What model and part number?
The 9V-12V/3A mobile power supply can be used continuously on the Player for more than 5 hours, and can ensure stable output even when the battery is about to run out. You can find it on taobao.com for less than $20
I have also used hx stomp and gt1000core, yes, the gt1000core is very noisy.
I have been using isolated power sockets and mobile power sources, and the player performs very well. The noise that appears in the headphones can be almost ignored
I wish player had the same FX as KPA and was willing to pay for it
This is a very important feature and I hope to be able to use it like the KPA in the future
Thank you guys, this MIDI captain seems interesting but I’m afraid it has too mamy buttons for me. I’m also singer so I just want to keep everything simple but still it’s a great option
Midicaptain comes in versions with 2, 4, 6, and 10 switches, which should meet your requirements
it's just a recaptcha. I've just tried, it works fine. Maybe you want to try again, possibly with another browser.
This is a network restriction from China. Thank you for your reply. I'll try and come up with a solution
AppleTreeChen, pls do not post the same question in multiple threads. If you want a timely answer from us, use the contact form on our website.
Sorry, I tried yesterday but couldn't get the verification code from the contact table. So I can only post questions on the forum
Hello everyone, I am building a midi controller for my PROFILER player and PROFILER header. May I ask if it is possible to obtain the tuner information of the player/header through the MIDI command? I hope to display the results sent by the KPP/KPA tuner on the LCD of the controller. If possible, can anyone provide information about MIDI functionality? Thank you very much for your reply! 
fantastic, thank you AppleTreeChen . I had looked on their website but couldnt find the info i sought.
Their website is slow to update, he's too busy.
This information you got (no quantity limit) is the answer I got from consulting him this morning
Display MoreThis looks very promising, if only the product hadn't been sold out...
Can you further customize what the buttons control and how the lights on the buttons behave?
This would make this ideal for me. For instance, is this possible:
1 - short press: previous rig (no light on the button)1 - long press: DLY module on/off (no light)
2 - short press: next rig (no light)
2 - long press: REV module on/off (no light)
3 - short press: Tuner on/off (button light up when activated)
3 - long press: Don't know yet
A - short press: previous bank (no light)
A - long press: A module on/off (no light)
B - short press: next bank (no light)
B - long press: B module on/off (no light)
C - short press: NRPN sequence to manipulate Rig Volume to switch between 0 db and +3 db (button light up when boosted)
C - long press: Don't know yet
One more thought: surely the KPP knows the note you are tuning to, even if it can't show it. Perhaps it will be possible eventually to send the note to a MIDI device like this to show on the screen?
I've asked Dr. Zuo for advice on questions like these, and he informed me that all of this is possible, it's just the initial firmware at the moment, and we need to wait for it to continue to improve, he's just too busy!
Also, as far as I know, midicaptain is an open and customizable system, so if you have a midicaptain maybe you can try to code and set it up yourself. I'll do some experimenting with my midicaptain when I get it. If you have more ideas, you can also contact Dr. Zuo directly via email to exchange ideas.
As for displaying the tuned notes on the screen, I will check the kemper's official technical documents, and if I can implement it through the midi system, I will convey it to Dr. Zuo as soon as possible. If you have any good solutions, you can also propose them for discussion, after all, I also very much hope to have such a function
Awesome.
AppleTreeChen , what is your affiliation with the product and/or developer?
You seem to have some great inside knowledge and communication with the developer, as if you are the actual developer. (that is intended as a compliment)
thanks again!
I and Dr. Zuo, the creator of Midicaptain, are netizens. We can communicate anytime on WeChat, and like other netizens, I will put forward some ideas and functional requirements. For example, midicaptain currently offers this feature for players (thank you for your contribution and inspiration!). If Dr. Zuo believes that this suggestion has practical value and operability, he will soon provide the latest solution.
In fact, I currently do not have my own midicaptain (although I will soon have one). Instead, I use simulation software to test and learn MIDI knowledge. Once I have new ideas or encounter new problems, I will contact Dr. Zuo for consultation. It's a very pleasant communication!
Midi Captain has launched the latest firmware for players, which is a surprising update (it is free). Do you still have its users here?
The first time two-way control with SysEx NRPN in MIDI Captain serials
Functions:
1 - short press: Selects the 1st preset in the current bank (every bank contains 5 presets)
1 - long press: Toggles the DLY module on/off
2 - short press: Selects the 2nd preset in the current bank
2 - long press: Toggles the REV module on/off
3 - short press: Selects the 3rd preset in the current bank
3 - long press: Switches to the next bank (there are 10 banks in total)
A - short press: Selects the 4th preset in the current bank
A - long press: Toggles the module in slot A on/off
B - short press: Selects the 5th preset in the current bank
B - long press: Toggles the module in slot B on/off
C - short press: Activates tapping
C - long press: Switches to the previous bank
Assuming you are a user of this device, can you tell me if it is able to put out multiple CC commands with one button press, or NRPN data with one button press?
i understand it can send a variety of messages with one press, ie prog-chage, CC, note-on, but hoping it can do upto four CC commands on a single press.
thanks for any info
Yes, and there is no quantity limit. You can learn more detailed information hereMIDI Captain MINI 6 Controller with HID Multi-state Cycling – PaintAudio
