Yes it should work because the midi messages and events are much the same.
For more read the midi chapter in the Main Manual you can program the Pacer with this online editor
visit https://studiocode.dev/doc/pacer-editor/
Posts by Yoda Guitar
-
-
Hey dude - I sent you an email at [email protected] and it bounded back. I wanted to ask you about the 4x12 issues you were having as I am having the same problems.
Don't ride a dead horse, please always check the date of the post.
-
Im Player Handbuch steht auf Seite 169 das ein einfache Programchange genügt.
Ist den der Kemper-Player mit dem iPad über Bluetooth gepaired (gekoppelt?)
Funktioniert den der RigManager auf dem iPAD?
Installiere die Software Pocket MIDI auf deinem iPAD wähle die USB MIDI Schnittstelle aus (InputPort/Outputport)
öffne views Programchange und teste zunächst ober Player richtig reagiert.
Wenn das nicht hilft dann schließ den Player per USB an deinen PC oder MAC an,
und benuze die Pocket Midi Software auf dem PC.
-
Bin gespannt auf Deine Erkenntnisse - den Chocolate habe ich hier auch rumliegen, habe ihn aber bisher nicht für den Kemper eingesetzt.
Fast wie ich es mir gedacht habe, man kann zwar beliebig viele CC events auf einen Schal/Taster legen , die beim Drücken oder auch togglen des Tasters gesendet werden. Beim Expression Pedal kann er aber nicht den Pedalwert in zwei 7 Bit Werte auf zwei CC Nachrichten verrechnen dh. man kann keine 14 Bit (MSB/LSB) Datenvalues berechnen. Mann kann pro CC Eintrag nur einen MAX und MIN Wert für 0 und 100% angeben. Man kann auch hier Mehrere CC and min MAX werte angeben, nur man kann nicht mit dem Pedalwert Rechnen.
Sowas hier geht nicht.
LSB = PedalValue &0x7F
MSB = Pedalvalue >> 7 & 0x7FIch werde wohl doch etwas selbst basteln müssen.
-
Please download the MIDI Parameter Documentation 8.6
at https://www.kemper-amps.com/downloads/5/User-Manuals#
Page 10
Or read the Main Manual 10.2Page 375
Depending on Brows or performance mode it is CC48 CC49
-
a) eine direkte Steuerung über ein Expression-Pedal geht nicht; mit etwas Fummelei müsste es allerdings theoretisch möglich sein, die Kopfhörer-Lautstärke mit einem MIDI-Pedal zu steuern. Es gibt jedenfalls laut Dokumentation einen Parameter, mit dem man per NRPN die Kopfhörerlautstärke regeln kann. Allerdings nur eben per NRPN (ziemliche Frickelei mit 4 MIDI-Befehlen hintereinander) - weiß gar nicht, ob es da externe MIDI-Pedale gibt, die das senden können. Also eher theoretisch...
b) ich finde die Steuerung über ein Pedal eher sinnvoll für dynamische Anpassungen (also laufende Änderungen während des Spielens) - für statische Anpassungen (wie eben die Kopfhörer-Lautstärke) würde ich das nicht verwenden. Auch viel zu viel Gefahr, dass man im Eifer des Gefechts voll aufs Pedal trampelt und sich die Ohren wegbläst...
a) Bin gerade dabei NRPN mit Expression Pedal auszuprobieren, habe mir mal das "m-vave chocolate bt wireless midi controller" bestellt, der kann angeblich NRPN ob er das auch für eine angeschossenes Pedal kann, werde ich dann berichten. Die meisten können es eben nicht.
b) Ich will damit die Looper Playback Laustärke Regeln und den Looper Steuern ohne auf der Remote immer Umschalten zu müssen.Mal sehen ob es klappt.
-
Vielleicht mache ich ja gerade einen Denkfehler, aber kann man den Monitor Out dafür nicht nutzen?
Jaein, der Monitor out ist nur lineout und benötigt einen Kopfhörer verstärker.
Außerdem fehlt die Space einstellung die man für Kopfhörer unbeding aktivieren sollte.
Anyway die Kopfhörerlautstärke mit einem Expression Pedal einzustellen halte ich für keine so sinnvolle Lösung.
Bei InEar Systemen stellt man die Lautstärke am Bodypack ein und gut ist.
Kleine InEar Systeme sind heute auch nicht mehr so teuer,
habe letzt eins von NUX ausprobiert und das war wirklich gut (besser als das LD System) für einen günstigen Preis. -
Das wird schwierig, die Volumen Pedal Funktion hat nichts mit dem Master Volumen Regler zu tun.
Was man bräuchte wäre "Master Volumen" als Funktion des Volumenpedals im System Menu und dann die Kopfhörer Verlinkung im Output einschalten.Also wenn es ganz einfach gehalten werden soll würde ich bei einem alten Volumenpedal den Poti austauschen zB. gegen ein 470 Ohm Pott als Passives Volumen.
Besser wäre natürlich einen kleinen Kopfhörer Verstärker in das Volumenpedal einzubauen.
Da gibt es kleine Module für 5 bis 6 Euro in der Bucht.
https://www.ebay.de/itm/5pcs-L…uino-EK1236-/256325837601 -
You can download the LOGO on the download page section https://www.kemper-amps.com/do…ress-and-Public-Relations
download :Logo Kit Kemper Amps 2011
-
-
Options 1
- You can use any online CSV to Word or Text converterCSV to TXT Converter • Online & Free • MConverterBatch convert CSV to TXT online. Convert large CSV files up to 2 GB each. Fast and easy exporting from CSV to TXT in bulk.mconverter.euCSV to TXT - online-convert.comConvert CSV to TXT in high quality by using this online file converter.document.online-convert.comOption 2
- You can use any free office software like libre office or free office to import csv files.
FreeOffice: Die beste kostenlose Alternative zu Microsoft Office
Home | LibreOffice - Free Office Suite - Based on OpenOffice - Compatible with Microsoft
-
I have a Ubiquity UniFi system that doesn't have a WPS feature.
WPS should be accessible by using the Admin Website in the router.
https://tipsforefficiency.com/unifi-wps/ -
Use WPS - Button !!
WPA2/3 Password length is specified between 8 to 63 Characters.
So Kemper has to support this. -
-
Interesting. How are you powering the remote?
Is the connection stable? Any latency?
I wrote a short instruction in german but you can translate this with google
-
Use "Wireshark" and you will see it's MIDI over IP (for Datakomunication) and it's UDP broadcast to find the Remote.
I'm using my Remote Wireless . -
This is not my device, perhaps for new Kemper users with existing pedalboard looking for something like HX Stomp or ToneX.
Unless I can copy my rigs one-to-one on a player device, it doesn't make sense to me.
I've sold most of the stompboxes and won't start again.
In the end you end up with additional stomps and the Kemper-player, just as bulky on a pedalboard as with a Kemper-Stage,
but with additional limitations in functionality.
A nice introduction to the Kemper world, but not a real replacement or backup.
-
According to my information, the Rig Manager installer for MAC OS requires the Rosetta2 emulator.
open the terminal and type in:
softwareupdate --install-rosetta
-
BOME midi translator. You do not have to calculate anything. Set the imput and output hardware, draw a line between them. Push the footswitch for it to learn the comand and tell it which output NRPN message to send to KPA.
Thx a lot,
With that you can record the current value.
But I like set a value between 0 to 100% on a ramp function. or expression pedal
From the Kemper MIDI example:
“Reverb/Mix” is at NRPN #9603, so MSB (“address page”) is 75 ($4B) and LSB (“address number”) is3 ($03).
To send a 14-bit high resolution value to 8192:
$B0 $63 $4B <- Addresspage
$B0 $62 $03 <- address number
$B0 $06 $40 <- MSB
$B0 $26 $00 <- LSB
By the way this example is outdated because Adresspage 75 no longer exists since KAOS Version 6 but Kemper still publish examples that can't work
So this calculation for MSB/LSB (SHR means Bitshift Right C++ >> operator , or BITRSHIFT(number, shift_amount) in Excel
So, why $40 and $00? Because 8192 is $2000 and:
a) ($2000 SHR 7) AND $7F = $40 The upper 7 of 14 bits.
b) ($2000 AND $7F) = $00; The lower 7 of 14 bits. -
Same here, mate. I had trouble with ancient Greek as well, but I made the looper work with a classical midi foot-controller. I used a midi translator. I hope the picture helps. (I still couldn't program the STOP footswitch, but I am working on it)
What App do you use ?
I 'm using Pocket MIDI for testing.
But for NRPM i didn't find any userfrienly app which converts a Decimal value into two 7Bit MSB/LSB
like dec value 567 to MIDI MSB/LSB 0x04 0x37 instead of 0x0237 wich you get as normal Hex value.
I'm using for this calculation an external website MIDI BYTE Calculator.
I hate MIDI, it's so lowlevel 80's style. Reminds my when I starteted with Comodore and Atari Computers with peek and poke.
No protocol security, no data verification or checksum and no packet acknowledgment, not even ACK/NACK