GenHarris Connecting a passive cab to the monitor out is not recommended since this will possibly harm the OP amp of the monitor output. You need to connect your passive cab to the speaker output and make sure to activate the "Monitor cab off" option in the output menu to deactivate the cab sim for the speaker output while keeping it active for the main outputs.
It worked. Thank you all for helping!
Thank you very much! Is it the right setting?
I
Hi there!
Today I've to record a reharshal and I would like to play with my band using my real 4x12 cabinet while I record my guitar with a cabinet simulation. In other words, I want to remove the cabinet simulation to play with my real cab, and record the kemper output with cabinet simulation at the same time. Is it possible? Thank you!
Hi there!
A few weeks ago I made some profiles from my Orange TH30. That's the amp I use on most of our live shows, and I tried to make some versatile profiles for practise or reharshal. Surprisingly, the quality of the profiles is much better than I expected, so I decided to share it. I am considering using these profiles in my next shows.
I made many profiles with different settings: 2x clean (for me, they are awesome), 3x crunch-rock (I usually put a tubescreamer before the preamp) and 2x Metal (TH30 Dirty channel allows you to get dark high gain tones).
These TH30 profiles are DI. They're intented for use with cabinet or IRs. I recommend using them with cabinet simulations or with real cabs. Most of the time I use them with Celestion G12T-75.
If you read the Comment section in the metadata, there are details about how I set up the amp when I made the profile (volume, shape, gain, etc). I've to say they are really accurated to my real TH30. I couldn't tell the difference in most of the profiles, except in the metal ones; in which I noticed a little compression.
I hope you enjoy!
