It might be an issue of the pedal. Change your pedals an find out if the Dunlop behaves as morph-pedal in the same way as in the function of volume.
Posts by IngoRockt
-
-
Im Handbuch ist das sehr gut beschrieben: das Handbuch kannst du unter Support herunterladen oder hier klicken
-
Set the gain on highest postion. Then set morph to the lowest postion and save the Performance. From now activating Morph brings you from the highest to the lowest postion. I'm not sure the toe postion ist highest or lowest gain. You must try.
-
-
Schau dir diesen Thread mal an: Fletcher/Munson effect
-
Ich verstehe nicht warum beim Kemper, was ja ein deutsches Produkt ist, alles auf Englisch sein muss.
Es ist ein Produkt für den internationalen Markt. Deshalb kann ich verstehen, dass die Homepage eine "golbal" akzeptierte Sprache nutzt. Es gibt ein sehr gutes Handbuch in deutsch, es gibt Video-Tutorials in deutsch und einen deutschsprachigen Teil hier im Forum.
Wenn du konkrete Fragen hast, dann stelle diese einfach im deutschsprachigen Teil des Forum. Du wirst sehen, es wird dir in deutscher Sprache geholfen.
Den Editor kann ich garnicht Downloaden da mein Mac zu alt ist.
Die Software-Entwicklung kann nicht für jedes "historische" Gerät die passenden Lösungen bereit halten. Dazu sind die technischen Anforderungen heutzutage zu unterschiedlich. Apple stellt für deinen Mac ja auch nicht das aktuelle OS zur Verfügung.
In der digitalen Welt sind Anpassungen der Hardware an die Anforderungen der Software (leider) von Zeit zu Zeit notwendig.
-
ich hab das selbe Problem, und der kemper ist über USB angeschlossen.
Die Neuinstallation der Treiber könnte helfen. Ich würde es versuchen
-
Hallo allerseits,
vielleicht hat (oder hatte) hier jemand dasselbe Problem wie ich, nämlich das der Editor im Rig Manager einfach nicht erscheint!
Ich hatte bis vor der allerersten Version des RM 3.0 noch nie Probleme gehabt, die erste Version des Editors fuktionierte gar nicht, auch da kam die Fehlermeldung ,,eine unbehandelte Ausnahme ist eingetreten'' und er ließ sich nicht einmal öffnen.
Seit dem vorletzten Update kann ich den RM 3 zumindest öffnen aber der Editor erscheint einfach nicht, der gesamte untere Bereich ist einfach dunkelgrau.
Mit dem Kempersupport hatte ich schon zu tun, es kam eine Antwort, ich habe detallierte Fehlermeldungen mitgesendet, danach hieß es ,,unsere Techniker schauen sich das an '' das ist nur leider schon fast 2 Monate her !
Vielleicht hatte einer dasselbe Problem ?
Beste Grüße !
Hast du deinen Kemper mit dem PC über das USB-Kabel verbunden? Der Editor erscheint nur, wenn der Kemper am PC angeschlossen ist.
-
Where do you place the Delay? In Stompsection before Amp it might happen.
-
I installed the new Beta of RigManager 3.0.87 and OS 7.1.9.
Ok, while some bugs are gone - like saving to the Profiler - some new bugs are introduced.
I just discovered a new amp from RigExchange, tweaked it to my desires, copied it to my local library, did some rename, and then, with a second window opened, copied it to a performance slot and also to the next slot. This worked fine!
But then I discovered, that RigManager does not show the assigned modules for this rig. It must be some module chain from another rig. I did some settings on those modules, like assigning foot switches. Saved this configuration. And did this only with the Profiler. RigManager does not discover this - there is a mismatch between the Profiler and RigManager. After shutting down RigManager and starting it again, it shows the right module chain. Changing to another performance, RigManager shows the right module chain.
Same here!
-
JayArr Sorry for that. Please try again - I've replaced the download and it should be 7.1.9 for the Stage now. Thanks for letting us know.
No problem...
thanx
-
Anyone else with the Stage attempted the 7.19 update? It would seem that the kaos.bin file that it downloaded was the 718 version. It has a creation date of 12/13/2019. I have verified that the classic version comes with a creation date of 1/14/2020
The same. I think they made a mistake when packing the zip-file....;-)
-
Happy rest of the year....
-
@Farley: You are right. I tried it. I think it is a problem of communication between KPA and RM. The Performances in my Stage are ok. But RM dosnt update.
-
Found another issue...
When you have 2 windows open (as you have to to bring rigs into a performance), the performance slot details (i.e. the FX chain) doesn't change when you navigate to other performance slots.
I'm connected directly to the Kemper, no USB bus or adapters etc. involved.
Ticket raised.
Annoyingly, think I'm going to have to revert to the last stable release - finding lots of issues (which is to be expected, after all), but it's slowing down my workflow drastically. Just concerned that - last time I did this - I lost ALL rigs and performances, and the backup wouldn't load....Right mouse-button: "Preview in Profiler" should work.
-
Guido Bungenstock produziert derzeit.... Eins ist fertig.
-
I am not sure whether the audience will notice the difference between a well-set single profile and a dual profile. In recording situation you can mix up several amps/rigs.
-
Also you can set "Rig-Volume" to a higher level and store it with the Rig or Performance.
-
The maual you can download here: https://www.kemper-amps.com/downloads/12/Rig-Manager. Look all the downloads and you will find it. Morphing is possible but I dont remember how.
-
You can morph the gain in your rig. In System-Menue set "Rig-Button-Morph" and you can reduce the gain with the rig-button. Gain reacts in the same way as volume on guitar.