Posts by templeOVwatain

Quote from lightbox

https://d2zjg0qo565n2.cloudfro…te-control-user-guide.pdf

Go to page 29 and see the little screenshot.

In the box called Clock Source you need to pick S/PDIF.

If you want to run your audio interface with the Profiler off or disconnected, switch back the Clock Source to Internal.

General recommendation:

If you don't know what you're doing, stick with analog audio. Buy two cables XLR female -> TRS and connect the Profiler Main Outputs to 2 line inputs of your Scarlett. Then you don't have to worry about digital audio clock, sync, sample rate and so on.

Display More

Thank you! I'll give that a try and see how I fair

Quote from lightbox

If you use 1 S/PDIF cable only, you need to make sure that the Scarlett is sync'd to the incoming signal. In other words, the Profiler must be the master and the audio interface has to slave to it.

Thanks for responding but like I said, I'm new to all of this stuff and everything you just said to me just sounded like word soup. I'll preface again and say "I DON'T KNOW WHAT I'M DOING!" haha but again thank you for responding

I'm new to all of this, I'm trying to run my Kemper through the Scarlett 18i20 through the S/PDIF I/O and then I'm using Reaper for DAW.

It records fine when I plug my guitar directly into the interface but just clean and when I switch to the input on my Kemper reaper doesn't pick up the signal.

How should I connect everything in the proper way so that I'm actually able to record I guess is what I'm trying to ask?

Again, I'm a complete beginner to this and I apologize for the lack of cable management, it's coming soon.