the distortion on the left channel
The output of the right and left - jack
- JarZej
- Thread is marked as Resolved.
-
-
Be sure your output settings are master stereo.
-
Are you running the profiler into some kind of interface? Check to see that you haven't increased the gain on the interface's left input vis-a-vis the right.
-
The main output is set to stereo, no problem. And on the output XLR distorted is not.
-
The main output is set to stereo, no problem. And on the output XLR distorted is not.
Do you mean, that on XLR main output is fine and on 6.3mm JACK output the signal in left channel is distorted?
Can you confirm? -
Ano je to tak. Levý kanál 6,3 je zkreslený
-
Ano je to tak. Levý kanál 6,3 je zkreslený
I have translated from Czech language
Yes it's right. Left channel 6.3 is distorted
There are few people from Chech Republic or Slovakia - maybe @Peto @MirekGR10 can assist you
There is also facebook group for people from your country https://www.facebook.com/groups/1231525606921850/
-
The left channel 6,3 jack is distorted
-
The left channel 6,3 jack is distorted
You can always send a message to technical support to [email protected]
-
thanks so much for the info.
-
thanks so much for the info.
no problem, send a message to support, they respond quickly and are helpful.
-
The left channel 6,3 jack is distorted
Contact support, they should have an idea on what could be going on. -
One thing.
What happens when you swap lest and right cables in your 6,3mm outputs?
If you swap cables and still you hear distortion in left speaker, looks like speaker is defective.
Because if you swap right and left cables and now you hear distortion in right speaker, then it seems like your unit might be defective. -
repro is fine, the cables I had
-
can you write in your language? I will try to translate