Hi Guys
Just picked up my KPA yesterday, spent some time getting familar with the menus.
When i have Browsed the Cabinets there are only a few 10inch fenders and i think a Gibson, is that normal on factory setup, how do i get access to the cabs on all the factory rigs.
Also once you load or auto load a cab how do you get back to the original if you dont like what you are hearing
ANYWAY I AM IMPRESSED 
Paul
Welcome in the Kemper family PaulR.
What you find is absolutely ok, since just a few factory cabinets are saved in the cabinet section. If you want to save the other cabinets you have two options:
a) save each cabinet for any rig with the save procedure;
b) check them out with the lock function. Basically you lock the cabinet section while you switch rigs: so you'll hear the amp profiles with a different cabinet.
If you want to go back you just need to load again the rig. If you chose the B) option, remember that you have to unlock the cabinet section, otherwise you'll stuck with the cab you locked.
you can lock whatever you want, eq,amp,cab,stomp etc
Yes you can.
Just lock the AMP section and then scroll the profile with the browse knob or with the navigator.
That's how I copy my pre and post effects into the rigs. I go to one of my fav presets and lock section 1 and 3 but let the stack section unlocked. Then I go to the preset where I want to apply my effects and hit store to store the new preset with the fxs from the fav preset.
Hi Paul
Here are the Cabs.
Unzip, copy into a Shared/Cabinet folder on your USB stick, and Import into the Kemper...the Cabs will automatically go to the Cab section.
First let the Kemper format your USB stick.
Try any of the crunchy/hi gain Profiles with the Tills cabinets.
Thanks so much Guys
I have to say that this the most helpful forum out there 
cheers
Paul
But also get the latest cabs from the latest update in the session #2 thread
or get them here : )
CABS
I included them in my Cab file. 
I noticed : ) but you still had the older ones..in your zip file so I wasnt sure.
(I updated the thread yesterday with new cabs etc)
