Posts by Qfever

I waiting for it . Fixed global eq useless some time. We can change global eq frequency, it will wonderful

Thank you , i loved new ones with large headroom, i did keep tones in my local library

i fixed this problem.

Overdub does not work with dual reverb effects such as dual delay.

Change the dual delay setting to single delay and the problem is solved

i fixed this problem.

Overdub does not work with dual reverb effects such as dual delay.

Change the dual delay setting to single delay and the problem is solved

Quote from Veguero

For me, this issue is still not resolved.

Quote from Burkhard

That is not possible. I'm not sure, how practical that would be. These settings are relevant in context of a particular PROFILE. It's like copying the trimming paramaters of one particular airplane type e.g. 737 to another airplane type e.g. 747 which has completely different flight characteristics.

the only way seems to be manual copying

I cannot add youtube video =(
heeelp ?

Edit: I found its ok

Hello everyone from the kemper brotherhood

Does anyone know how to copy amp settings?

When I copy the amp section, the copy is done with the amplifier itself. I just want to copy the amp's settings and paste it into another amp model.

Thanks for all answers or advices

• increase Definition :
• There are many ways to brighten the tone, yes, but I don't think amp settings are the right way to do that. It is necessary to adjust this over and over again for each tone. Definition changing not just treble, it is changing so many thing of tone
• 
  use the Presence control (like Kempermaniac wrote)
  Presence is mean less headroom or compress sound. If you are playing lead guitar headroom is everything..
• 
  
  mix in direct signal
  I'm in direct to in Sound Card. Focusrite 4i4 Gen3. I try line input and normal preamp input also..
• try a Treble Booster
  Maaaaan it is stomp. Not made for main output tone control.

• use new strings
  I dont mean treble problem for input guitar tone. Global output need treble but more high side not near mid tone. Guitar input and guitar tone work like a charm
  
  
  
  if it's a clean sound, try disabling the CABINET completely
  Cabinet is everything for live using or direct live PA mixer or stage or record or something like that...

Quote from DonPetersen

Qfever

please try the following (not necessarily in this order):

• increase Definition
• use the Presence control (like Kempermaniac wrote)
• try a different CABINET
• mix in direct signal
• try a Treble Booster
• use new strings
• if it's a clean sound, try disabling the CABINET completely
  
  increase Definition :
• There are many ways to brighten the tone, yes, but I don't think amp settings are the right way to do that. It is necessary to adjust this over and over again for each tone. Definition changing not just treble, it is changing so many thing of tone
• use the Presence control (like Kempermaniac wrote)
  Presence is mean less headroom or compress sound. If you are playing lead guitar headroom is everything..
  
• mix in direct signal
  I'm in direct to in Sound Card. Focusrite 4i4 Gen3. I try line input and normal preamp input also..
  
• try a Treble Booster
  
  Maaaaan it is stomp. Not made for main output tone control.
  
• use new strings
  I dont mean treble problem for input guitar tone. Global output need treble but more high side not near mid tone. Guitar input and guitar tone work like a charm
  
  if it's a clean sound, try disabling the CABINET completely
  
  Cabinet is everything for live using or direct live PA mixer or stage or record or something like that...

Display More

Quote from Kempermaniac

This is normal Amp-EQ behaviour; Bass/Mid/Treble/Presence are all influencing each other. Did you try out the presence knob as well for getting this chrystal tone? Another solution could be to dial in a Studio EQ post stack.

I try presence know but presence was take from me headroom of guitar riff. More presence is mean less headroom, and i dont like compress sound by presence.

Output section have a lot of settings for S/PDIF, you should search there.
And when you are in Global Section - turn Browse Knob, you'll see some output route presets. You can choose S/PDIF global section presets in browse menu.

Hi all..
I'm new user. I spent 15 years with processors. What was missing for most of them was that the crystallized frequency could not be adjusted in high pitched sounds.
Kemper Global EQ high section is not give to me what i want..

I turn the treble up because I want to get a bright tone in the treble frequencies without affecting the mid frequencies, but I get a sound that scratches ( harsh treble ) close to the mid frequency instead of the crystal tone.

For this, it should be either the treble 2 tab or the frequency selection.