Hi!
The performance mode will be implemented in firmware. All available KPA units have been shipped with the hardware chickenhead knob for performance from the beginning.
Posts by Ingolf
-
-
Glad you found it.
KPA's midi mapping is pretty straightforward actually. -
Hello! I'm Dan from Chandler Arizona. I bought my Kemper amp in May of 2012. I've been using it like a maniac. I didn't realize there was this much of a support forum on the site. I think when I originally looked here there wasn't a lot going on. Sure has changed. Good to see a lot of people using these amps. I love mine.
Thanks for all of the tips and advice. Looks like a great group of people here.
Welcome, Dan!
-
I don't know if they have private messages here, but if they do send me one.Dan
You need to enable private messages in your profile first.
>> profile>> settings>> communication -
Some flickering happened in 1.54.
-
IMO the OP's post is way too exaggerating, sorry!
IIRC CK once stated that the profiling engine has been unchanged for a long time (for years).
So don't expect any 'epiphanies' à la Cliff Chase when he (again and again) thought to have reinvented the wheel once again.
I think (and hope) we'll see some small refinements and some additions for convenience's sake but nothing drastic. -
Karl, welcome, long time no see...
Remember the Atomicamps forum back then? -
Thanks Pete!
-
-
Sounds ok here. I hear strong transients when you hit the chord.
After that nothing suspicious. -
HI, regarding Tap switch.. on teh HD500 the Tap switch is also the tuner switch. I expect that it is not possible to hav both on one switch (Line6 has defined a short tap for tapping and a longtap for Tuner)...
I have to decide if I use it for Tapping or Tuner?
I know the HD 500 well. Have sold mine 6 months ago.
When you want to control tap or tuner of the KPA with that switch you have to decide which CC is sent. -
I tested it today... it works....
I don#t know why it works without PC calls? FS5 to 8 is not assigned .. is adjusted to "none".. is this a hardcoded functionality from line6 that bank 1 is 1-4, bank 2 is 5-8, bank 3 is 9-12, ... and so on?Yes.
Can you give me a hint how i can activate the TAP function on the HD500? Tuner is fine, but tap doesnt work in my opinion...
thxTap switch must be set to CC # 30.
-
.
I thought I read somewhere that the original came with 200 presets. Not sure if that is correct or not, but this had to have at least 350. I deleted a bunch and still have over 300.The stock presets nowadays are well over 300 profiles as they come with the rigpPacks 1-4 included.
-
Welcome, Ed!
-
I think it's very important that the looper could be used with any assignable MIDI controller, stop, play, rec etc... It doesn't make sense to only let it function with the kemper foot controller.
True, and any controller with freely assignable CC's should be able to control the looper then.
It's the same with the present controllable feature set of the KPA. -
People throw up a great many theory's on how to get a better tone, but the answer is no secret. The best thing you can do to improve your tone isn't sold in a store, in fact its absolutely free. Put in a little extra practice, say 15 more a day than you normally would. And I mean practice, not twiddling dials or chunking out power chords, actually working on technique. The results will be darn near immediate...
This.
Plus I might add: the instruments that we glorify today (say vintage Strat and LP) were simple stock instruments in their time, even when the (nowadays considered 'magic') recordings took place (think Clapton, Hendrix, Page).
-
-
-
Could be interesting to me.
-
I would be really curious to see and hear Scott Grove's explicit language on this topic.
Remember?YEAH, let Scott do a review...