Okay. If the kpa is able to do something like "dry on monitor", CK will enable it in a further update .. maybe.
Posts by Gitarrenschlumpf
-
-
Hidden funtion? A dry signal at monitor out? Please tell us!
-
Gibt´s ne Rechnung mit MWSt dazu?
-
Mine will we 2x 180 watts @ 8 ohms. Do you know a price of the upcoming matrix-amp?
-
-
There are 3 outs: main, monitor and headphones. Where is the 4th?
What I did is really simple. I soldered 3 wire under the midi in and under the power input. The ac-adaptor for the mfc is now inside and wired to pin 6 and 7 of the new midi in. The midi in signal from the real midi in is wired to pins 3, 4 and 5. Just a normal 7 pin midi in as you know it from rocktron and fractal audio.
Tuner display with the mfc will be a problem. Fractal audio did this with a special midi signal (a midi out from the axe-fx at the midi in port). The kpa has to do it right that way but I think they won´t do it for mfc-users.
-
So when it´s coming out?
-
Thank you guys!
Where are you getting the preamp signal from? I would be highly interested if it would be possible to get a post fx stereo signal with the "cab off" function active to use with my tube stereo power amps. Since the monitor out is mono only this would be extemely cool.
I don´t think that this would be possible. A digital signal comes out of the dsp´s and a D/A converter puts it into a analogue signal. The switch for cab on/off is inside the dsp. So it comes out with cabs on or off and I can´t split it into cabs on AND off. Sorry. Go FRFR. This would solve your problem.
I´m getting the preamp signal from the monitor out if I want it mono. If I go stereo I think my signal comes from headphone-out. So I can change the volumes of main out and my stereo cabs indepentently.
-
By the way .. coming up next is the poweramp. I still don´t know if this gonna be stereo or mono..
-
It was a spraycan anthrazit from a german propertymarket called TOOM. Warranty? I don´t know but I think mine is over...
-
Power supply + midi in for my MFC-101 is now inside the KPA. And it works.
Don´t do this at home, if you don´t know what you´re doing! Happy modding!
[Blocked Image: http://www.fiveup-live.de/wp-content/uploads/2012/07/DSC02154.jpg]
[Blocked Image: http://www.fiveup-live.de/wp-content/uploads/2012/07/DSC02153.jpg]
-
I had to paint it black.
[Blocked Image: http://www.fiveup-live.de/wp-content/uploads/2012/07/DSC02152-e1342883776787.jpg]
-
I don´t know if the monitor out is symmetrical, but try it. You can´t damage anything. The ring contact is just ground, if it´s not symmetrical.
-
SS. FRFR and class d amp. My setup for the last 3 years on stage.
-
POWERAMP
No problem. 2x 180 watts @8 ohms class d. I could tune your kpa?
-
point 2: Okay, I´ll try.
point 3: No. You can lock just one reverb. I want all reverbs I´ve set in my rigs, but the mix-percent of those should be adjustable for live. -
1. Editor
2. a nice tube chanelstrip as a new ampmodel
3. global reverb mix in percent (I liked this feature in the axe-fx)
4. multibandcompressor
5. limiter -
+1 for the large one