Posts by vette68

Hi Hannes

I had the same problem as you. There was no sound. The problem turned out to be that i have used a little longer screws to secure the Kemper stage to my pedalboard

Rune

Hi, I have not installed the newest beta software on the stage unit, only on my old lunchbox.

I will give it a try during the christmas holidays

I have the same issues with the Effects II switch, it is constantly failing. The bank down button is not working well either.

Thanks

Hi

Yes i use XLR outputs, thank you for the information, i was not aware of that.

Hi

I have used a Kemper profiler head for several years with the master output set to -12db.

I now have a kemper stage set up with the same profiles, but i need to set the master out to -7db to be at the same level.

This doesent make sense to me. Has anyone else experienced the same?

Rune

+1. I have no need to control the master or monitor out it is always set.

I really need to control the rig volume.

Quote from ALEX_Audio

Problem is: Tip an ring it's different in the Boss pedal than in the Midi Raider.
If you want to use one singe stereo cable to the exp connection, you have to solder a own cable.

Ground to ground
Tip to Ring
Ring to Tip

That works great.
I just found it out, when I put the plot cable to in and out of the boss 500 h the wrong was around. Then the problem is exactly the same as with a standard stereo cable.

Display More

Thanks Alex. I will try this!

Hi
The problems i experienced with ts stereo to ts stereo was that tha values was "jumping" all over the place.
When i switched to ts steroe to 2x ts mono the signal was changing smoothly.
The only problem now was that the throw on the boss pedals seems a little bit to long, so i had to tape
some small bits of wood under the pedal where i wanted it to stop.
It doesent have to be situation for the EP1-KP pedal

Rune

Hi
I am using Midi raider and two Boss FV 500H pedals. you should find the setup for it in the manual starting on page 33. I use cables with two ts mono to one ts stereo, instead of ts stereo to ts stereo cause that didnt work well through the midi raider.
http://www.rocktron.com/upload…midi_raider_manual_r4.pdf

Rune

Quote from Stoneland

Finally another KPA in my town.... Cheers Rune!

Hi, I have owned my KPA for almost a year now, i didnt know anybody else had one, good to see you here

Thanks everyone!! I really appreciate the kind words.

This is a very special gig. We play concerts here every Wednesday through the summer and we have done so for 11 years now.
This is located between two pubs and since its surrounded by buildings we are getting a intimate feel with the crowd and
They all sing along and are having a good time.

Thanks for youre kind reply,

The video was filmed with only one cam, so its not very good.
The sound was recorded into cubase directly from the mixer
and i added som of the cam sound to get the "live" feeling to it.

Regarding the profiles, i dont recall the exact ones.
but the one on you shook me is Andys JCM800
and the one on Highway to hell is Armins JMP 1959 HW

Heres another song with Isabell on vocals from the same night:
https://www.youtube.com/watch?v=J92zBF-cH60

Rune

Hi all

Just wanted to share a couple videos of my band playing at a outdoor concert in Mandal Norway
this is a couple of AC/DC songs. (we are not a AC/DC cover band, so no Angus dancing here)

https://www.youtube.com/watch?v=se2izKK_L4Q

https://www.youtube.com/watch?v=mWQmj_vpZWU

Rune

Hi Armin

I just bought the markV profiles.
Can i download this new version when youre done with it,
or do i have to purchase it again?

Rune

Yes, Harmonizer is the only thing i miss right now