Posts by 3c22afd373ec16bd1b99c7187138ea08004f8e6a
-
-
Ich würde mal eher darauf tippen, das es uns die NAMM 2019 (vom 24.1. bis 27.1.) beschert!
-
-
My biggest wish a looper that syncronizes to the rig tempo.
Ohhh Yes! +1
-
Gehe mal unter Downloads -> RigPacks und dort "KEMPER™ Factory Content 5.5 for Upgraders" herunterladen und in den Kemper importieren. Dann findest Du diese anschließend unter Cabinets.
LG Kay
-
Du bist wohl auf den falschen Artikel bei Amazon (TP-Link TL-PoE10R) gelandet, schaue mal unter KLICK (TP-Link TL-PoE150S).
VG Kay
-
-
-
I also use the BeatBuddy with this MIDI cable. That works very well. But I also have the problem with the unquantized loop, which also bothers me a lot. The loop runs out of rhythm.
-
-
Was ich noch schmerzlich vermisse ist die Quantisierung des Loopers, so das dieser synchron zum MIDI-Clock läuft.
-
-
-
-
oder sogar ( ?)
Für Kemper User immer nur ... per default auch ohne Absolution!
-
I've measured the regularity of the Kemper bpm, and it seems that there is a lot of jitter.
My BB runs constantly with the beat from the Kemper, i can neither fluctuations hear nor see in the BB-bpm display.
-
How would quantization work, without included drums?
For example, i use a BeatBuddy-Drummer, the BB can be sync via MIDI with Tap-Tempo on the KPA-Remote. Now, of course, it would be nice if the Loop runs synchronous to the BB.
-
Yes, to me! +1
I am there to 100% with you, i hope now synonymous for more than a year on this function.The KPA Looper is ok (Sound & Looptime) for me, but without quantization for some applications unfortunately unusable. As I've heard it, but this has currently no priority,so i am currently looking for an alternative, but this also means more gear on the board. With my old Zoom G3 it was already better.
-
Hello at all,
there is allways no Quantize Loop in the Remote and for this Problem i would like buy a external Looper, aka Boss RC 202. It was nice when in System-Menu -> Remote-Setting -> Button-Assignment the Switches from Looper define to send MIDI-Commands to an external Device, so i can use des RC 202 with the Remote.
... and sorry for my modest english ...
best regards
Kay
-
Vorhin ist auch noch als Firmware die 4.2.2.12590 raus gekommen, hast Du die bereits drauf?
> interoperability issue with specific 3rdparty floorboards leveraging bi-directional MIDI protocol
Vielleicht lag der Fehler auch hier und wäre nun gefixt!
LG Kay