As i am not a good tweaker, i would like to have Presets for the Acoustic Simulator.
For example optimized settings for common used Guitars/Pickup Positions like Power-Strat-Bridge-HB etc...
Posts by wrbi
-
-
-
-
EdwardArnold
your setting sounds great with my Ibanez AZ2204 (neck SC) and the Kabinet.
Thanks a lot -
I Would find it useful if the value is displayed .
Also Wanted to send the same Feature request
-
+1 for the FREQOUT
-
Mine updated itself
-
Look at the absolute mode Burkhard explained above.
You have to select the next Bank to get to Slots higher than 26/3.
-
When i search in „all Rigs“ , search Starts After the second letter and i am not able to type more before the search Ends After about 20 seconds .
It would be useful to type the complete search String and then press „search“
-
My studio is based on Cubase and I know they have a remote vst thing, but I've never used it as I currently don't have a band.
Anyone have any experience with it? I'd be curious to know how well it performs and feels. With these over the Internet things latency seems like the biggest challenge.
The VST Connect is not made for realtime.
You can record a Person far away.
The other person hears your Music about 2 seconds later. You hear the other person also 1 or 2 seconds later.But Cubase compensates the delay so the recording is perfect.
-
I had a similar request in thread 49389
-
-
I had a similar problem yesterday.
In the Output section i switched the direct Output to OFF.After that I only had a signal when the effects loop was switched on.
-
DG Run Like Hell!
from user Heater.
With a Strat in positions 2 and 4 you get a Marillion like clean sound.
Love it
-
And when the imprints can be saved per rig in future ( i hope very soon), rigs can be delivered with matching imprints.
-
i don't think it is on RE,
but you can find it here:
https://mbritt.com/2018/07/01/…-challenge-steve-stevens/ -
To all Kabinet and Kone users:
Anyone going the fullrange route, instead of imprints?
Have you tested the "Sweetening" control at all?
Any impressions?
CK
i only found about 1 hour time to play with it (got it on tuesday).
first i thougt i have to go to fullrange for the clean sounds, but now i like them with imprints when directivity is set to a high value.
for high gain sounds i use a low value of directivity (3-4).
so i think i will only use imprints as i love the amp in room sound .
This amp in room sound i was missing since i bought my first GT-10 about 10 years ago. -
-
Just got mine
-
I also searched for spdif, but it is not easy to find in smaller, not to expensive, units.
most people in the forum say that you don't hear a difference between spdif and an additional daad conversion.