Sorry for stupid question, but if I buy two knob footswitch (something like this: http://www.thomann.de/fi/marshall_mrpedl91003_footswitch.htm) to use with Kemper switch 1 and 2, does led's work without battery? I would use adapter to make stereo to dual mono.
Two knob footswitch with Kemper
- penatuna
- Closed
-
This switch will not work with the Profiler as it requires momentary or unlatching switches. LEDs will only work on switches that have a battery for powering them. See http://www.thomann.de/fi/boss_fs6.htm
-
It's cheap and easy to make your own (like the two pictured in my profile pic).
-
It's cheap and easy to make your own (like the two pictured in my profile pic).
This switch will not work with the Profiler as it requires momentary or unlatching switches. LEDs will only work on switches that have a battery for powering them. See http://www.thomann.de/fi/boss_fs6.htm
Thanks mates. I think I will make my own and just one knob model without led.
Is this right footswitch to use as Kemper switch: http://www.uraltone.com/spst-footswitch-momentary.html -
I use the Boss FS-6 as an add on to my FCB1010 or just alone at times.. dual switch, programmable latch and lights work off the battery.
-
I use the pedal from my peavey bandit for switching rigs up and down. It works perfectly. Only drawback is, i have to press (and release of course) each switch twice in order for the rig switching to take place.
I assume this would be true for any classic amp pedalswitch.HTH
-
I use the pedal from my peavey bandit for switching rigs up and down. It works perfectly. Only drawback is, i have to press (and release of course) each switch twice in order for the rig switching to take place.
I assume this would be true for any classic amp pedalswitch.Just replace your switches with two of these http://www.ebay.com/itm/141137073199
-
Thanks! I just wanted to point out that everything you have at home should work with some workaround if you don't want to buy something more
