New KPA user here, I've got this issue where I've just assigned my profiles to my Pod HD500x as a MIDI -- every control switch works perfect, except one... It automatically turns on the tuner, mutes all volume and tells me this:
[Blocked Image: http://i62.tinypic.com/nojbeh.jpg]
If I click 'Pedal Vol. to max' it goes back to normal, if I hit Exit or anything else all volume levels on the KPA remain silent unless I reboot. Anyone know an easy fix to this?
If your volume pedal on the HD pulled back? My guess is that it is sending a continuous controller value of "0" to the Kemper.
It's not pulled back, I have it maxed out. I've tried messing with it and it does nothing when I get this message.
Do you have the Volume turned down all the way in your POD patch?
If the POD Volume pedal is not sending CC #7 to the Kemper, moving it will have no effect.
My guess is that your POD is sending a CC message and value that it shouldn't to the Kemper.
Is your guitar connected to the HD in or the KPA in? I also noticed different behaviour with the volume pedal when I connect the guitar to the HD in, it reacts not as it's suppose to but I didn't dive really into it further. I tried this setup because I had to use a Variax and the POD supplies the power for it.
If I only use the HD for sending midi, and I use the input of the KPA, the volume works fine. Seems like the POD is sending different volume commands when a guitar is plugged into it.
Try to take a look at your midi stream via MIDIOX. I believe that something sends a 000 at CC#7.
