Just got my DSR112. Thought why not try to put my EQ stomps after the Kemper instead of in the loop (find it too easy to clip the Kemper loop)? Works well actually. Anyone else do this?
Anyone running external gear between the main/monitor out and a powered FRFR?
- deadpan
- Closed
-
-
Sometimes I put a looper after the profiler. It works well.
-
Looper here too.
-
Deadpan, you're not clipping the loop, you're clipping the pedal, which is meant for a guitar signal.
Putting the EQ after the Profiler will make things worse, because the signal you feed into it is likely stronger.Are you by any chance using a distortion loop instead of a regular loop? Use the latter, it's made to keep the input signal lower and to re-raise it after the pedal, exactly for the purpose of not overloading it.
-
Regular loop. I contacted support at the time and they said I was clipping the return of the loop. The Mxr 10 band can do both line and instrument levels, when the pedal clips all of the lights blink making it very obvious. It is actually working very well after even with the volume on 10.
-
Uh, ok! Then you were clipping the A/D converter in the Return input.
Makes sense, I always forget there's one there as wellYes, lowering the stomp output would be the solution