Analogic reamping

    Hi,


    I would like to reamp my guitar sound with Kemper.


    1/ Recording my guitar with Kemper, i would like to send 2 tracks to my DAW,
    a- the signal with effects
    b- the clean signal


    Which outputs should I use ? a: main output and b: monitoring output ?


    2/ Now I would like to reamp the clean signal recorded in my DAW (b/) to my Kemper.
    What is the Input I can use, the standard guitar Input one ?


    Cédric

    Hi


    You can use the DIRECT OUT of the KPA for your "b" (dry) signal and either MONITOR or MAIN OUT for your "a" (wet) signal.


    To reamp, connect to the guitar input, better with a reamp box, to transform the low impedance - high level line signal from your daw, to a high impedance - low level instrument signal,that's more suitable for the guitar input.


    Alternatively,you can place the FX LOOP to the "A" slot, and connect the signal from your daw, to RETURN of the KPA. I'm not sure about the nominal level and impedance of this input, but the RETURN inputs usually are suitable to accept line signals.


    Maybe you're interested to reamp via SPDIF in/out. If you don't know it already, there's a section to the reference manual and some topics to this forum, that describe how to do it right.


    Have fun